Draft
Conversation
|
Size difference with the dev branch: Binary size differencenot the same command!
tinygo build -size short -o ./build/test.hex -target=feather-rp2040 ./examples/adafruit4650
go: downloading tinygo.org/x/tinyfont v0.3.0
not the same command!
tinygo build -size short -o ./build/test.hex -target=pico ./examples/tmc5160/main.go
go: downloading golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d
not the same command!
tinygo build -size short -o ./build/test.hex -target=nano-rp2040 -stack-size 8kb ./examples/net/websocket/dial/
go: downloading golang.org/x/net v0.33.0
not the same command!
tinygo build -size short -o ./build/test.hex -target=nano-rp2040 -stack-size 8kb ./examples/net/mqttclient/natiu/
go: downloading github.com/soypat/natiu-mqtt v0.5.1
not the same command!
tinygo build -size short -o ./build/test.hex -target=wioterminal -stack-size 8kb ./examples/net/mqttclient/paho/
go: downloading github.com/eclipse/paho.mqtt.golang v1.2.0
flash ram
before after diff before after diff
17016 17016 0 0.00% 6576 6576 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-rp2040 ./examples/adafruit4650
61744 61744 0 0.00% 6528 6528 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adt7410/main.go
8764 8764 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adxl345/main.go
13240 13240 0 0.00% 7136 7136 0 0.00% tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/amg88xx
8924 8924 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/main.go
11372 11372 0 0.00% 6928 6928 0 0.00% tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/apds9960/proximity/main.go
9828 9828 0 0.00% 5108 5108 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/itsybitsy-m0/main.go
7356 7356 0 0.00% 2296 2296 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/at24cx/main.go
8008 8008 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bh1750/main.go
7368 7368 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/blinkm/main.go
71412 71412 0 0.00% 3640 3640 0 0.00% tinygo build -size short -o ./build/test.hex -target=pinetime ./examples/bma42x/main.go
65628 65628 0 0.00% 6544 6544 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmi160/main.go
27664 27664 0 0.00% 5120 5120 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmp180/main.go
64300 64300 0 0.00% 6568 6568 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmp280/main.go
11816 11816 0 0.00% 5152 5152 0 0.00% tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/bmp388/main.go
23308 23308 0 0.00% 5744 5744 0 0.00% tinygo build -size short -o ./build/test.hex -target=metro-rp2350 ./examples/bno08x/i2c/main.go
7684 7684 0 0.00% 3336 3336 0 0.00% tinygo build -size short -o ./build/test.hex -target=bluepill ./examples/ds1307/sram/main.go
21564 21564 0 0.00% 3532 3532 0 0.00% tinygo build -size short -o ./build/test.hex -target=bluepill ./examples/ds1307/time/main.go
29088 29088 0 0.00% 5316 5316 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/ds3231/alarms/main.go
42964 42964 0 0.00% 5316 5316 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/ds3231/basic/main.go
4400 4400 0 0.00% 2256 2256 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/easystepper/main.go
70312 70312 0 0.00% 7316 7316 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/flash/console/spi
66712 66712 0 0.00% 9356 9356 0 0.00% tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/flash/console/qspi
7068 7068 0 0.00% 2260 2260 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/gc9a01/main.go
67652 67652 0 0.00% 6700 6700 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/i2c/main.go
68212 68212 0 0.00% 6844 6844 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/uart/main.go
8420 8420 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/hcsr04/main.go
5528 5528 0 0.00% 2256 2256 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hd44780/customchar/main.go
5568 5568 0 0.00% 2256 2256 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hd44780/text/main.go
10376 10376 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/hd44780i2c/main.go
14248 14248 0 0.00% 6928 6928 0 0.00% tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/hts221/main.go
15980 15980 0 0.00% 2340 2340 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hub75/main.go
10156 10156 0 0.00% 7264 7264 0 0.00% tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/basic
11144 11144 0 0.00% 5224 5224 0 0.00% tinygo build -size short -o ./build/test.hex -target=xiao ./examples/ili9341/basic
29436 29436 0 0.00% 38424 38424 0 0.00% tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/pyportal_boing
10188 10188 0 0.00% 7256 7256 0 0.00% tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/scroll
11224 11224 0 0.00% 5216 5216 0 0.00% tinygo build -size short -o ./build/test.hex -target=xiao ./examples/ili9341/scroll
263644 263644 0 0.00% 47108 47108 0 0.00% tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/slideshow
10472 10472 0 0.00% 5120 5120 0 0.00% tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis3dh/main.go
13632 13632 0 0.00% 6928 6928 0 0.00% tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/lps22hb/main.go
26188 26188 0 0.00% 2304 2304 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/lsm303agr/main.go
27860 27860 0 0.00% 7168 7168 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/lsm303dlhc/main.go
12312 12312 0 0.00% 5128 5128 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/lsm6ds3/main.go
10020 10020 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mag3110/main.go
8984 8984 0 0.00% 5120 5120 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp23017/main.go
9416 9416 0 0.00% 5128 5128 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp23017-multiple/main.go
9440 9440 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp3008/main.go
71812 71812 0 0.00% 6544 6544 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp2515/main.go
27396 27396 0 0.00% 3808 3808 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/microbitmatrix/main.go
27276 27276 0 0.00% 5852 5852 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit-v2 ./examples/microbitmatrix/main.go
7464 7464 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mma8653/main.go
7368 7368 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mpu6050/main.go
76256 76256 0 0.00% 7788 7788 0 0.00% tinygo build -size short -o ./build/test.hex -target=p1am-100 ./examples/p1am/main.go
12312 12312 0 0.00% 5756 5756 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/pca9685/main.go
6244 6244 0 0.00% 3268 3268 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setbuffer/main.go
4628 4628 0 0.00% 2260 2260 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setpixel/main.go
10604 10604 0 0.00% 5732 5732 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-rp2040 ./examples/seesaw/soil-sensor
11916 11916 0 0.00% 5740 5740 0 0.00% tinygo build -size short -o ./build/test.hex -target=qtpy-rp2040 ./examples/seesaw/rotary-encoder
3113 3113 0 0.00% 560 560 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino ./examples/servo
13896 13896 0 0.00% 5804 5804 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/sgp30
7988 7988 0 0.00% 7128 7128 0 0.00% tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/shifter/main.go
57568 57568 0 0.00% 3672 3672 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/sht3x/main.go
57560 57560 0 0.00% 3680 3680 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/sht4x/main.go
57568 57568 0 0.00% 3672 3672 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/shtc3/main.go
12320 12320 0 0.00% 8712 8712 0 0.00% tinygo build -size short -o ./build/test.hex -target=xiao-ble ./examples/ssd1306/
11692 11692 0 0.00% 5684 5684 0 0.00% tinygo build -size short -o ./build/test.hex -target=xiao-rp2040 ./examples/ssd1306/
11780 11780 0 0.00% 5684 5684 0 0.00% tinygo build -size short -o ./build/test.hex -target=thumby ./examples/ssd1306/
5896 5896 0 0.00% 2260 2260 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1331/main.go
6552 6552 0 0.00% 2260 2260 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/st7735/main.go
6480 6480 0 0.00% 2260 2260 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/st7789/main.go
16784 16784 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/thermistor/main.go
9640 9640 0 0.00% 4880 4880 0 0.00% tinygo build -size short -o ./build/test.hex -target=circuitplay-bluefruit ./examples/tone
10136 10136 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/tm1637/main.go
10924 10924 0 0.00% 5744 5744 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/touch/capacitive
8816 8816 0 0.00% 7128 7128 0 0.00% tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/touch/resistive/fourwire/main.go
12348 12348 0 0.00% 7324 7324 0 0.00% tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/touch/resistive/pyportal_touchpaint/main.go
15772 15772 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/vl53l1x/main.go
14328 14328 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/vl6180x/main.go
24568 24568 0 0.00% 14076 14076 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-nrf52840-sense ./examples/waveshare-epd/epd1in54/main.go
6356 6356 0 0.00% 2300 2300 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13/main.go
5944 5944 0 0.00% 2292 2292 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13x/main.go
6248 6248 0 0.00% 2300 2300 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd4in2/main.go
26380 26380 0 0.00% 18816 18816 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/waveshare-epd/epd2in66b/main.go
6908 6908 0 0.00% 5120 5120 0 0.00% tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/ws2812
5100 5100 0 0.00% 8862 8862 0 0.00% '-xesppie' is not a recognized feature for this target (ignoring feature)
62852 62852 0 0.00% 6296 6296 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-nrf52840 ./examples/is31fl3731/main.go
1853 1853 0 0.00% 600 600 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino ./examples/ws2812
1328 1328 0 0.00% 182 182 0 0.00% tinygo build -size short -o ./build/test.hex -target=digispark ./examples/ws2812
32068 32068 0 0.00% 5120 5120 0 0.00% tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/bme280/main.go
16392 16392 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/microphone/main.go
11740 11740 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/buzzer/main.go
12268 12268 0 0.00% 5120 5120 0 0.00% tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/veml6070/main.go
6796 6796 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l293x/simple/main.go
8716 8716 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l293x/speed/main.go
6772 6772 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l9110x/simple/main.go
9120 9120 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l9110x/speed/main.go
7248 7248 0 0.00% 3308 3308 0 0.00% tinygo build -size short -o ./build/test.hex -target=nucleo-f103rb ./examples/shiftregister/main.go
7020 7020 0 0.00% 2248 2248 0 0.00% '-xesppie' is not a recognized feature for this target (ignoring feature)
13280 13280 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis2mdl/main.go
11248 11248 0 0.00% 5104 5104 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/max72xx/main.go
76924 76924 0 0.00% 6680 6680 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/dht/main.go
36232 36232 0 0.00% 6388 6388 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-rp2040 ./examples/pcf8523/
71312 71312 0 0.00% 6688 6688 0 0.00% tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/alarm/
7176 7176 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/clkout/
70748 70748 0 0.00% 6688 6688 0 0.00% tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/time/
71144 71144 0 0.00% 6688 6688 0 0.00% tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/timer/
12196 12196 0 0.00% 5708 5708 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/qmi8658c/main.go
10876 10876 0 0.00% 5692 5692 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-rp2040 ./examples/pcf8591/
8732 8732 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/ina260/main.go
12176 12176 0 0.00% 5120 5120 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/ina219/main.go
9252 9252 0 0.00% 5232 5232 0 0.00% tinygo build -size short -o ./build/test.hex -target=nucleo-l432kc ./examples/aht20/main.go
73760 73760 0 0.00% 11092 11092 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/sdcard/console/
61996 61996 0 0.00% 8576 8576 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/i2csoft/adt7410/
10160 10160 0 0.00% 7128 7128 0 0.00% tinygo build -size short -o ./build/test.elf -target=wioterminal ./examples/axp192/m5stack-core2-blinky/
9020 9020 0 0.00% 5680 5680 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/xpt2046/main.go
13068 13068 0 0.00% 4920 4920 0 0.00% tinygo build -size short -o ./build/test.hex -target=nucleo-wl55jc ./examples/sx126x/lora_rxtx/
31772 31772 0 0.00% 7200 7200 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/ssd1289/main.go
11300 11300 0 0.00% 6656 6656 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/irremote/main.go
12292 12292 0 0.00% 5756 5756 0 0.00% tinygo build -size short -o ./build/test.hex -target=badger2040 ./examples/uc8151/main.go
10516 10516 0 0.00% 5752 5752 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/scd4x/main.go
7984 7984 0 0.00% 5088 5088 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=circuitplay-express ./examples/makeybutton/main.go
9448 9448 0 0.00% 5104 5104 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/ds18b20/main.go
122064 122064 0 0.00% 8108 8108 0 0.00% tinygo build -size short -o ./build/test.hex -target=nucleo-wl55jc ./examples/lora/lorawan/atcmd/
16104 16104 0 0.00% 7348 7348 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/as560x/main.go
9912 9912 0 0.00% 5700 5700 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/mpu6886/main.go
7764 7764 0 0.00% 5080 5080 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/ttp229/main.go
67344 67344 0 0.00% 7212 7212 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/ndir/main_ndir.go
62124 62124 0 0.00% 3768 3768 0 0.00% tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ndir/main_ndir.go
65468 65468 0 0.00% 6600 6600 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/ndir/main_ndir.go
9364 9364 0 0.00% 5692 5692 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/mpu9150/main.go
11572 11572 0 0.00% 5728 5728 0 0.00% tinygo build -size short -o ./build/test.hex -target=macropad-rp2040 ./examples/sh1106/macropad_spi
8508 8508 0 0.00% 6156 6156 0 0.00% tinygo build -size short -o ./build/test.hex -target=macropad-rp2040 ./examples/encoders/quadrature-interrupt
66840 66840 0 0.00% 7180 7180 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/mcp9808/main.go
42124 42124 0 0.00% 7536 7536 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/tmc2209/main.go
13224 13224 0 0.00% 5688 5688 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/tmc5160/main.go
12004 12004 0 0.00% 4900 4900 0 0.00% tinygo build -size short -o ./build/test.uf2 -target=nicenano ./examples/sharpmem/main.go
62424 62424 0 0.00% 6332 6332 0 0.00% tinygo build -size short -o ./build/test.hex -target=feather-nrf52840 ./examples/max6675/main.go
12856 12856 0 0.00% 5748 5748 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/ens160/main.go
22956 22956 0 0.00% 5772 5772 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/si5351/main.go
27992 27992 0 0.00% 7100 7100 0 0.00% tinygo build -size short -o ./build/test.hex -target=pico ./examples/w5500/main.go
86268 86268 0 0.00% 7532 7532 0 0.00% tinygo build -size short -o ./build/test.hex -target=challenger-rp2040 ./examples/net/ntpclient/
347208 347208 0 0.00% 17164 17164 0 0.00% tinygo build -size short -o ./build/test.hex -target=pyportal -stack-size 8kb ./examples/net/http-get/
119920 119920 0 0.00% 8428 8428 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-nano33 -stack-size 8kb ./examples/net/tcpclient/
306628 306628 0 0.00% 16216 16216 0 0.00% tinygo build -size short -o ./build/test.hex -target=nano-rp2040 -stack-size 8kb ./examples/net/websocket/dial/
103332 103332 0 0.00% 10408 10408 0 0.00% tinygo build -size short -o ./build/test.hex -target=metro-m4-airlift -stack-size 8kb ./examples/net/socket/
388384 388384 0 0.00% 19180 19180 0 0.00% tinygo build -size short -o ./build/test.hex -target=matrixportal-m4 -stack-size 8kb ./examples/net/webstatic/
166356 166356 0 0.00% 10400 10400 0 0.00% tinygo build -size short -o ./build/test.hex -target=arduino-mkrwifi1010 -stack-size 8kb ./examples/net/tlsclient/
153756 153756 0 0.00% 9168 9168 0 0.00% tinygo build -size short -o ./build/test.hex -target=nano-rp2040 -stack-size 8kb ./examples/net/mqttclient/natiu/
116588 116588 0 0.00% 13704 13704 0 0.00% tinygo build -size short -o ./build/test.hex -target=wioterminal -stack-size 8kb ./examples/net/webclient/
338244 338244 0 0.00% 22264 22264 0 0.00% tinygo build -size short -o ./build/test.hex -target=wioterminal -stack-size 8kb ./examples/net/webserver/
338476 338476 0 0.00% 22148 22148 0 0.00% tinygo build -size short -o ./build/test.hex -target=wioterminal -stack-size 8kb ./examples/net/mqttclient/paho/
172592 172592 0 0.00% 14168 14168 0 0.00% tinygo build -size short -o ./build/test.hex -target=elecrow-rp2040 -stack-size 8kb ./examples/net/tlsclient/
118092 118092 0 0.00% 12192 12192 0 0.00% tinygo build -size short -o ./build/test.hex -target=elecrow-rp2350 -stack-size 8kb ./examples/net/ntpclient/
6266854 6266854 0 0.00% 1025044 1025044 0 0.00%
|
Open
Contributor
|
Any chance to get it merged soon? |
deadprogram
force-pushed
the
go1.26-status
branch
from
472f58c to
804f43c
Compare
Signed-off-by: deadprogram <ron@hybridgroup.com>
We use this a bunch. Upstream switched to `internal/strconv` which is much heavier.
Signed-off-by: deadprogram <ron@hybridgroup.com>
* esp32s3 spi * stabilization freq cpu * cheange clacl freq for spi * fix linters * esp32s3-spi: change default pins for esp32s3 xiao * set default configuration * esp32s3-spi: extends smoketests for esp32s3
This changes the order for initialization of the random number seed generation on wasm platforms until after the heap has been initialized. Should fix #5198 Signed-off-by: deadprogram <ron@hybridgroup.com>
Signed-off-by: deadprogram <ron@hybridgroup.com>
Signed-off-by: deadprogram <ron@hybridgroup.com>
The compiler may generate calls to fminimum/fmaximum on some platforms. Neither of the libm implementations we statically link against have these functions yet. Implement them ourselves.
* esp32s3-i2c implement interface * esp32s3-i2c: disable m5stamp_c3 * added simple tests without Listen * replace smoke tests * esp32s3-i2c: fix allocation in tx
… same as expected by the go coverage tool Signed-off-by: deadprogram <ron@hybridgroup.com>
* esp3s3 pwm * esp32s3-pwm: added spi alias for esp32s3 for tests * esp32s3-pwm: fix linters * esp32s3-pwm: fix rename * esp32s3-pwm: replace if to switch * esp32s3-pwm: chip specific registry * esp32s3-pwm: fix linters
… stm32-svd files (#5212) * tools/gen-device-svd: orderPeripherals: prevent skipping base peripherals derived by name Recent SVDs from stm32-rs, like the one for stm32u595, define derivedFrom attributes that do not refer to a peripheral group name, but to a peripheral name. For instance, the peripheral I2C5 may be derived from "I2C1", not from "I2C". The previous algorithm records, in case the group name is non-empty, only the group name in the knownBasePeripherals map, not the name of the peripheral itself. So in case of the base peripheral I2C1 with group name I2C: although the peripheral gets added to the sorted list, it would be added to knownBasePeripherals with the group name "I2C" as key, not with "I2C1". A following peripheral, I2C5, derived from I2C1, with an empty group name, would be recorded as known with key "I2C5", but omitted from the sorted list, because "I2C1" is not recognized as known. The following peripheral SEC_I2C5, derived from I2C5, with empty group name, would be added to both the knownPeripherals map and the sorted list. So if, later, the sorted list is examined, it would find SEC_I2C5 earlier than its base peripheral I2C5, which would be missing from "peripheralDict", resulting in a nil pointer access. This patch makes sure that, to stay with the example, that "I2C1" is recorded as known too (not only the group name "I2C"), so that "I2C5" won't be skipped anymore, preventing the program from crashing. * tools/gen-device-svd: orderPeripherals: ensure ordered content of missingBasePeripherals After the first run, missingBasePeripherals may contain peripherals with dependencies that are not guaranteed to be in proper order. This change implements additional loop runs that try to reduce the size of the missingBasePeripherals as far as possible. [With recent SVDs from stm32-rs this change will not produce different results, though (since these source files contain already properly ordered peripherals).] * tools/gen-device-svd: Register: move dim array decoding to utility type dimArray This allows encoding of dim increment and array indices to be re-used by other elements supporting dim arrays. This change just restructures parts of register specific code, it does not change the output of the program. * tools/gen-device-svd: parseBitfields: support field dim arrays Patched SVD files from stm32-rs recently contain many fields with dim array parameters and names containing %s (like "CC%sIF"). This change adjusts parseBitfields so that these field elements get resolved. * tools/gen-device-svd: SVDField: allow multiple enumeratedValues In recent patched SVD files from stm32-rs there may be two enumeratedValues elements per SVDField, not just one. The SVD specification allows up to two entries (they may be used to define different enums for read and write access). This change extends SVDField and parseBitfields so that two enumeratedValues are processed like a single one. * tools/gen-device-svd: orderPeripherals: sort peripherals of same group with larger number of registers/bitfields first In group "TIM" there may be general purpose timers like TIM16 and advanced timers like TIM1. The advanced peripheral may contain a larger number of registers than the general purpose ones. TIM1 may contain CCR1..CCR4, SMCR and OR1, while TIM16 only knows about CCR1. Unfortunately in some SVDs, like the one for stm32g031, TIM16 is defined before TIM1. Since register and bitfield constants are generated taking only the first peripheral of a group into account, the resulting .go file may lack definitions for e.g. CCR2..CCR4, SMCR, and OR1. This change adjusts orderPeripherals so that, to stay with the example, a peripheral like TIM1 will be moved in front of TIM16, resulting in an output file containing the larger set of definitions. * tools/gen-device-svd: SVDEnumeration: support isDefault Recent SVD files created by stm32-rs use "isDefault" in enumeratedValue elements for purposes like the Div1 enum for clock prescaler registers without specifying a specific value. Previously, these enumeratedValues would be skipped because of the enumEl.Value == 0 condition, and the corresponding const definitions like "RCC_CFGR2_PPRE2_Div1 = 0x0" would be missing from the resulting .go files, so existing code relying on these constants would not compile anymore. This change adds a utility type enumDefaultResolver that helps finding an actual value that is unused by the enumeratedValues that are defined for the field. More examples for values marked as "isDefault", along with their resolved values: DAC_CR_WAVE1_Triangle => 2 IWDG_PR_PR_DivideBy256 => 6 DAC_CR_MAMP2_Amp4095 => 0xb * tools/gen-device-svd: support derivedFrom attribute at field level This ensures that some more constants are included in the .go files that would otherwise be skipped (like e.g. ADC_SMPR2_SMP1_Cycles* of some STM32 devices), which prevented compilation of some programs. To avoid extending a lot of func argument lists, and since there is no context.Context in use yet, this change introduces a global derivationContext. * tools/gen-device-svd: tweak: stm32: ensure USART_ISR_TXE/TXFNF are present * tools/gen-device-svd: stm32: ensure CCMR*_Output alternate registers are sorted first * tools/gen-device-svd: stm32: add IWDG peripheral alias if SVD defines IWDG1
….s to ..722.s In stm32-rs, stm32f7x2.svd got replaced by stm32f722.svd and stm32f732.svd. This change adjusts the target definition where stm32f7x2 is used,
…clash with stm32 device name Previously, there was no specific stm32f4r5.svd in lib/stm32-svd, just stm32f4x5.svd was used; now, both files are present. This means that the existing build-tag stm32f4r5 will include the device/stm32/stm32f4r5.go file, and the additional build-tag stm32f4x5 would include the device/stm32/stm32f4x5.go file as well, resulting in build conflicts. Renaming just the tag, which is used in src/machine, and src/runtime, into stm32f4y5 solves this issue.
USART.ISR_FIFO_ENABLED => USART.ISR
IRQ_TIM6_DAC => IRQ_TIM6_DAC_LPTIM1
ADC.CHSELR => ADC.CHSELR0 (alternate registers 0/1)
Recent changes in stm32-svd result in a change from previous 16-bit register access to 32-bit access. Both access types are allowed, according to the register manuals.
Signed-off-by: deadprogram <ron@hybridgroup.com>
This adds usage of the new espflash package to perform flashing on ESP32, ESP32S3, ESP32C3, & ESP8266 boards. This means that you no longer have to install esptool.py in order to flash ESP32 based boards. Signed-off-by: deadprogram <ron@hybridgroup.com>
…lt-in esp32flash Signed-off-by: deadprogram <ron@hybridgroup.com>
Signed-off-by: deadprogram <ron@hybridgroup.com>
…om number generator. Signed-off-by: deadprogram <ron@hybridgroup.com>
* save * esp32s3: save * adc * worker on esp32s3 * worker after flash arduino * save * fix * simple adc * added adc * esp32s3-adc: rm debug * esp32s3-adc: clear * last refactor * linters * esp32s3-adc: recover example * esp32s3-adc: reuse fuse for esp32c3 * esp32s3-adc: refactor bugs * esp32s3-adc: fix adc2 for esp32c3 * esp32s3-adc: group to adc files * esp32s3-adc: revert changing board * esp32s3-adc: recover example adc * esp32s3-adc: fix edge values adc & added smoketests * esp32s3-adc: rename methods * esp32s3-adc: extends adc tests * esp32s3-adc: drop debug * esp32s3-adc: added ADCX const * esp32s3-adc: change adc tests * esp32s3-adc: added comment for esp32c3 * esp32s3-adc: drop debug empty loops * esp32s3-adc: drop duplicate gpio * esp32s3-adc: change return values to 0..65520
* begin adding ring512 implementation * refactor to make operation driven fuzz test * refactor USBCDC.Read to use ring512 * try txhandler separate to flush * working USBCDC with large packets * fix binary size * remove comment * documentation improvements
This refactoring reduces code duplication from the esp32c3/esp32s3 ADC implementation, by reusing the register/efuse calibration code since the same basic procedures are used by both processors. Signed-off-by: deadprogram <ron@hybridgroup.com>
This switches the rp2040 and rp2350 to use the tasks scheduler by default instead of using the cores scheduler. Too many race conditions at present, we need to look into exactly why. In the meantime, going back to the tasks as default will address a lot of these intermittent problems. Signed-off-by: deadprogram <ron@hybridgroup.com>
This refactors and corrects the SPI implentation for the ESP32C3 and ESP32S3 processors. There was a lot of duplicated code, as well as some errors such as incorrectly calculating speed on the esp32c3 implementation. This will also be helpful when adding additional processors that use very similar peripheral registers. Signed-off-by: deadprogram <ron@hybridgroup.com>
Signed-off-by: deadprogram <ron@hybridgroup.com>
This adds a new flash method 'esp32jtag' to explicitly define when this reset method is needed. When flashing esp32c3/esp32s3 boards on Windows this method of board reset is required, otherwise the reset does not take place and the board cannot be flashed. Signed-off-by: deadprogram <ron@hybridgroup.com>
MCAUSE was never being cleared after handling an interrupt. On RISC-V, mret does NOT zero MCAUSE — it retains the last trap cause. Every other TinyGo RISC-V target (FE310, K210, QEMU) explicitly does riscv.MCAUSE.Set(0) after handling. The ESP32-C3 was missing this. Signed-off-by: deadprogram <ron@hybridgroup.com>
Signed-off-by: deadprogram <ron@hybridgroup.com>
This improves the ESP32-C3 USBDevice implementation by using interrupts to properly handle data RX/TX. It also stubs out USB interfaces for HID functions, since those cannot be implemented on ESP32-C3 due to using a JTAG-USB interface. Signed-off-by: deadprogram <ron@hybridgroup.com>
Add processor target (cortex-m33), linker script (2048K flash, 768K RAM), and arduino-uno-q board target. Runtime initializes 160MHz clock via PLL1 from HSI16, with PWR Range 1 and EPOD booster. Also add psctype abstraction for timer PSC register width, needed because the U5 SVD defines PSC as a 16-bit register.
Add machine-level support for STM32U5 family: GPIO ports A-I with clock enables via AHB2ENR1, EXTI pin interrupts (individual EXTI0-15 IRQs), timer definitions (TIM1-8, TIM15-17), RNG, and alternate function clock enables for all peripherals. Add UART support with STM32U585 baud rate and register configuration. Add arduino-uno-q board pin definitions and USART2 serial. Update shared build tags: gpio_revb, gpio_reva, exti_exti, exti_syscfg.
Add I2C timing values for STM32U585 at 160MHz PCLK1 (10/100/400/500 KHz). Add I2C1 peripheral and pin definitions to arduino-uno-q board. Update i2c_revb build tag to include stm32u5.
Add SPIv2 driver for STM32U5 using TXDR/RXDR and CFG1/CFG2 registers, which differ from the classic SPI peripheral on older STM32 families. Implements Configure() and single-byte Transfer(). Add SPI1 peripheral and pin definitions to arduino-uno-q board. Exclude stm32u5 from the shared classic SPI build tag.
Signed-off-by: deadprogram <ron@hybridgroup.com>
The complex 160MHz PLL initialization was hanging the MCU. The fix: Replaced the entire PLL-based clock init with the MSI 4MHz default Signed-off-by: deadprogram <ron@hybridgroup.com>
Signed-off-by: deadprogram <ron@hybridgroup.com> machine/stm32u585: fix PWR peripheral clock was never enabled On STM32U5, PWR is on AHB3 and requires RCC.AHB3ENR.PWREN - unlike some other STM32 families where PWR is always clocked. Without this, all writes to PWR registers (including IO2SV for VDDIO2) were silently dropped, so GPIOG pins could never drive. Signed-off-by: deadprogram <ron@hybridgroup.com> target: correct I2C pin mapping for Arduino UNO Q Signed-off-by: deadprogram <ron@hybridgroup.com>
This adds the specific OpenOCD commands needed for flashing the onboard STM32U585 MCU directly from the Arduino UNO Q board. Thanks to https://github.com/jesdev-io/arduino-uno-q-pio-toolchain for the infor on how to do this. Signed-off-by: deadprogram <ron@hybridgroup.com>
Signed-off-by: deadprogram <ron@hybridgroup.com>
deadprogram
force-pushed
the
go1.26-status
branch
from
804f43c to
889b710
Compare
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
8 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This PR is just to test the current status of Go1.26 with @dgryski draft branch fixes.