Feat/migrate screen library

CONTRIBUTING.md

@@ -100,7 +100,7 @@ Commit messages follow the [Conventional Commits](https://www.conventionalcommit
 
 **Scopes** (optional but enforced): if provided, the scope **must** be one of the allowed values. The scope is recommended for driver-specific changes but can be omitted for cross-cutting changes.
 
-- Driver scopes: `apds9960`, `bme280`, `bq27441`, `daplink_bridge`, `daplink_flash`, `gc9a01`, `hts221`, `im34dt05`, `ism330dl`, `lis2mdl`, `mcp23009e`, `ssd1327`, `steami_config`, `vl53l1x`, `wsen-hids`, `wsen-pads`
+- Driver scopes: `apds9960`, `bme280`, `bq27441`, `daplink_bridge`, `daplink_flash`, `gc9a01`, `hts221`, `im34dt05`, `ism330dl`, `lis2mdl`, `mcp23009e`, `ssd1327`, `steami_config`, `vl53l1x`, `wsen-hids`, `wsen-pads`, `steami_screen` 
 - Domain scopes: `ci`, `docs`, `style`, `tests`, `tooling`
 
 ### Examples

commitlint.config.js

@@ -34,6 +34,7 @@ module.exports = {
         'style',
         'tests',
         'tooling',
+        'steami_screen'
       ],
     ],
     'type-enum': [

lib/steami_config/examples/calibrate_magnetometer.py

@@ -1,140 +1,150 @@
-"""Calibrate the LIS2MDL magnetometer and save to persistent config.
-
-This example runs a 3D min/max calibration by collecting samples while
-the user rotates the board in all directions.  The computed hard-iron
-offsets and soft-iron scale factors are stored in the config zone and
-survive power cycles.
-
-Instructions and a countdown are displayed on the SSD1327 OLED screen.
-Press MENU to start the calibration.
-"""
+"""Calibrate the LIS2MDL magnetometer using steami_screen UI."""
 
 import gc
 from time import sleep_ms
 
+import ssd1327
 from daplink_bridge import DaplinkBridge
 from lis2mdl import LIS2MDL
 from machine import I2C, SPI, Pin
-from ssd1327 import WS_OLED_128X128_SPI
 from steami_config import SteamiConfig
+from steami_screen import Screen, SSD1327Display
 
 # --- Hardware init ---
 
 i2c = I2C(1)
-oled = WS_OLED_128X128_SPI(
-    SPI(1),
-    Pin("DATA_COMMAND_DISPLAY"),
-    Pin("RST_DISPLAY"),
-    Pin("CS_DISPLAY"),
+
+spi = SPI(1)
+dc = Pin("DATA_COMMAND_DISPLAY")
+res = Pin("RST_DISPLAY")
+cs = Pin("CS_DISPLAY")
+
+display = SSD1327Display(
+    ssd1327.WS_OLED_128X128_SPI(spi, dc, res, cs)
 )
+
+screen = Screen(display)
+
 btn_menu = Pin("MENU_BUTTON", Pin.IN, Pin.PULL_UP)
 
 bridge = DaplinkBridge(i2c)
 config = SteamiConfig(bridge)
 config.load()
+
 mag = LIS2MDL(i2c)
 config.apply_magnetometer_calibration(mag)
 
 
-# --- Helper functions ---
-
-
-def show(lines):
-    """Display centered text lines on the round OLED screen."""
-    oled.fill(0)
-    th = len(lines) * 12
-    ys = max(0, (128 - th) // 2)
-    for i, line in enumerate(lines):
-        x = max(0, (128 - len(line) * 8) // 2)
-        oled.text(line, x, ys + i * 12, 15)
-    oled.show()
-
-
-def draw_degree(x, y, col=15):
-    """Draw a tiny degree symbol (3x3 circle) at pixel position."""
-    oled.pixel(x + 1, y, col)
-    oled.pixel(x, y + 1, col)
-    oled.pixel(x + 2, y + 1, col)
-    oled.pixel(x + 1, y + 2, col)
-
+# --- Helpers ---
 
 def wait_menu():
-    """Wait for MENU button press then release."""
     while btn_menu.value() == 1:
         sleep_ms(10)
     while btn_menu.value() == 0:
         sleep_ms(10)
 
 
-# --- Step 1: Display instructions and wait for MENU ---
+def show_intro():
+    screen.clear()
+    screen.title("COMPAS")
+
+    screen.text("Tournez la", at=(22, 38))
+    screen.text("carte dans", at=(22, 50))
+    screen.text("toutes les", at=(22, 62))
+    screen.text("directions", at=(24, 74))
+    screen.text("Menu=demarrer", at=(10, 90))
+
+    screen.show()
+
+
+def show_progress(remaining):
+    screen.clear()
+    screen.title("COMPAS")
+
+    screen.text("Acquisition...", at=(12, 44))
+    screen.value(remaining, at=(30, 60))
+    screen.text("Tournez", at=(30, 80))
+    screen.text("la carte", at=(28, 92))
+
+    screen.show()
+
+
+def show_message(*lines):
+    screen.clear()
+    screen.title("COMPAS")
+    screen.subtitle(*lines)
+    screen.show()
+
+
+def show_results(readings):
+    screen.clear()
+    screen.title("COMPAS")
+
+    screen.text("Resultats:", at=(24, 34))
+
+    y = 48
+    for i, heading in enumerate(readings):
+        line = "{}: {} deg".format(i + 1, int(heading))
+        screen.text(line, at=(16, y))
+        y += 12
+
+    screen.text("Termine !", at=(28, 112))
+    screen.show()
+
+
+# --- Step 1: Instructions ---
 
 print("=== Magnetometer Calibration ===\n")
-print("Current offsets:  x={:.1f}  y={:.1f}  z={:.1f}".format(
-    mag.x_off, mag.y_off, mag.z_off))
-print("Current scales:   x={:.3f}  y={:.3f}  z={:.3f}\n".format(
-    mag.x_scale, mag.y_scale, mag.z_scale))
-
-show([
-    "COMPAS",
-    "",
-    "Tournez la",
-    "carte dans",
-    "toutes les",
-    "directions",
-    "",
-    "MENU = demarrer",
-])
+
+show_intro()
 
 print("Press MENU to start calibration...")
 wait_menu()
 print("Starting calibration...\n")
 
-# --- Step 2: Acquisition with countdown ---
+
+# --- Step 2: Acquisition ---
 
 samples = 600
 delay = 20
 total_sec = (samples * delay) // 1000
+
 xmin = ymin = zmin = 1e9
 xmax = ymax = zmax = -1e9
 
 for s in range(samples):
     x, y, z = mag.magnetic_field()
+
     xmin = min(xmin, x)
     xmax = max(xmax, x)
     ymin = min(ymin, y)
     ymax = max(ymax, y)
     zmin = min(zmin, z)
     zmax = max(zmax, z)
+
     if s % 50 == 0:
-        remain = total_sec - (s * delay) // 1000
-        show([
-            "COMPAS",
-            "",
-            "Acquisition...",
-            "",
-            "Continuez a",
-            "tourner",
-            "",
-            "{} sec".format(remain),
-        ])
+        remaining = total_sec - (s * delay) // 1000
+        show_progress(remaining)
+
     sleep_ms(delay)
 
+
+# --- Compute calibration ---
+
 mag.x_off = (xmax + xmin) / 2.0
 mag.y_off = (ymax + ymin) / 2.0
 mag.z_off = (zmax + zmin) / 2.0
+
 mag.x_scale = (xmax - xmin) / 2.0 or 1.0
 mag.y_scale = (ymax - ymin) / 2.0 or 1.0
 mag.z_scale = (zmax - zmin) / 2.0 or 1.0
 
 print("Calibration complete!")
-print("  Hard-iron offsets: x={:.1f}  y={:.1f}  z={:.1f}".format(
-    mag.x_off, mag.y_off, mag.z_off))
-print("  Soft-iron scales:  x={:.3f}  y={:.3f}  z={:.3f}\n".format(
-    mag.x_scale, mag.y_scale, mag.z_scale))
 
-# --- Step 3: Save to config zone ---
 
-show(["COMPAS", "", "Sauvegarde..."])
+# --- Step 3: Save ---
+
+show_message("Sauvegarde...")
 
 config.set_magnetometer_calibration(
     hard_iron_x=mag.x_off,
@@ -144,42 +154,42 @@ def wait_menu():
     soft_iron_y=mag.y_scale,
     soft_iron_z=mag.z_scale,
 )
+
 config.save()
-print("Calibration saved to config zone.\n")
 sleep_ms(500)
 
+
 # --- Step 4: Verify ---
 
-show(["COMPAS", "", "Sauvegarde OK", "", "Verification..."])
+show_message("Sauvegarde OK", "", "Verification...")
 
 gc.collect()
+
 config2 = SteamiConfig(bridge)
 config2.load()
 
 mag2 = LIS2MDL(i2c)
 config2.apply_magnetometer_calibration(mag2)
 
-print("Verification (5 heading readings after reload):")
-result_lines = ["COMPAS", "", "Resultats:"]
+print("Verification (5 readings):")
+
+readings = []
+
 for i in range(5):
     heading = mag2.heading_flat_only()
-    line = "  {}: cap={:.0f}".format(i + 1, heading)
-    print("  Reading {}: heading={:.1f} deg".format(i + 1, heading))
-    result_lines.append(line)
+    readings.append(heading)
+
+    screen.clear()
+    screen.title("COMPAS")
+    screen.value(int(heading), unit="deg", label="Mesure {}".format(i + 1))
+    screen.show()
+
+    print("Reading {}: {:.1f} deg".format(i + 1, heading))
     sleep_ms(500)
 
-result_lines.append("")
-result_lines.append("Termine !")
-
-# Draw results with degree symbols
-oled.fill(0)
-th = len(result_lines) * 12
-ys = max(0, (128 - th) // 2)
-for i, line in enumerate(result_lines):
-    x = max(0, (128 - len(line) * 8) // 2)
-    oled.text(line, x, ys + i * 12, 15)
-    if "cap=" in line:
-        draw_degree(x + len(line) * 8 + 1, ys + i * 12)
-oled.show()
-
-print("\nDone! Calibration is stored and will be restored at next boot.")
+
+# --- Done ---
+
+show_results(readings)
+
+print("\nDone! Calibration stored.")