build(deps): bump the github-action-updates group with 3 updates

[dependabot]

Bumps the github-action-updates group with 3 updates: github/codeql-action/upload-sarif, github/codeql-action/init and github/codeql-action/analyze.

Updates github/codeql-action/upload-sarif from 4.37.7 to 4.37.8

Release notes

Sourced from github/codeql-action/upload-sarif's releases.

v4.37.8

No user facing changes.

Changelog

Sourced from github/codeql-action/upload-sarif's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

... (truncated)

Commits

• db488dd Merge pull request #4102 from github/update-v4.37.8-9ee088e13
• 1845f5b Update changelog for v4.37.8
• 9ee088e Merge pull request #4080 from github/henrymercer/studious-giggle
• 1aef003 Address review feedback on overlay disk flags
• 508b83b Merge main into overlay minimum disk feature branch
• d97b342 Merge pull request #4098 from github/mbg/permission-error-as-configuration-error
• 47fa622 Make EACCES a ConfigurationError
• 45693cc Refactor ENOSPC check into isDiskConfigurationError function
• c2fd8f5 Merge pull request #4081 from github/mario-campos/version-cache-to-disk
• c56f48e Log unexpected conditions during caching CLI output
• Additional commits viewable in compare view

Updates github/codeql-action/init from 4.37.7 to 4.37.8

Release notes

Sourced from github/codeql-action/init's releases.

v4.37.8

No user facing changes.

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

... (truncated)

Commits

• db488dd Merge pull request #4102 from github/update-v4.37.8-9ee088e13
• 1845f5b Update changelog for v4.37.8
• 9ee088e Merge pull request #4080 from github/henrymercer/studious-giggle
• 1aef003 Address review feedback on overlay disk flags
• 508b83b Merge main into overlay minimum disk feature branch
• d97b342 Merge pull request #4098 from github/mbg/permission-error-as-configuration-error
• 47fa622 Make EACCES a ConfigurationError
• 45693cc Refactor ENOSPC check into isDiskConfigurationError function
• c2fd8f5 Merge pull request #4081 from github/mario-campos/version-cache-to-disk
• c56f48e Log unexpected conditions during caching CLI output
• Additional commits viewable in compare view

Updates github/codeql-action/analyze from 4.37.7 to 4.37.8

Release notes

Sourced from github/codeql-action/analyze's releases.

v4.37.8

No user facing changes.

Changelog

Sourced from github/codeql-action/analyze's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

... (truncated)

Commits

• db488dd Merge pull request #4102 from github/update-v4.37.8-9ee088e13
• 1845f5b Update changelog for v4.37.8
• 9ee088e Merge pull request #4080 from github/henrymercer/studious-giggle
• 1aef003 Address review feedback on overlay disk flags
• 508b83b Merge main into overlay minimum disk feature branch
• d97b342 Merge pull request #4098 from github/mbg/permission-error-as-configuration-error
• 47fa622 Make EACCES a ConfigurationError
• 45693cc Refactor ENOSPC check into isDiskConfigurationError function
• c2fd8f5 Merge pull request #4081 from github/mario-campos/version-cache-to-disk
• c56f48e Log unexpected conditions during caching CLI output
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[github-actions]

Test Results

34 tests  ±0   34 ✅ ±0   21s ⏱️ +5s
 1 suites ±0    0 💤 ±0 
 1 files   ±0    0 ❌ ±0 

Results for commit ca64d0e. ± Comparison against base commit c4c1bd5.

[github-actions]

✅⚠️MegaLinter analysis: Success with warnings

Descriptor	Linter	Files	Fixed	Errors	Max errors	Warnings	Elapsed time
✅ ACTION	actionlint	6		0		0	0.06s
✅ ACTION	zizmor	6	0	0		0	2.38s
✅ CPP	clang-format	253	1	0		0	1.6s
✅ DOCKERFILE	hadolint	1		0		0	0.03s
⚠️ MARKDOWN	markdownlint	8	5	20		0	1.25s
✅ MARKDOWN	markdown-table-formatter	8	5	0		0	0.27s
✅ REPOSITORY	betterleaks	yes		no		no	1.18s
✅ REPOSITORY	git_diff	yes		no		no	0.03s
✅ REPOSITORY	grype	yes		no		no	63.92s
✅ REPOSITORY	ls-lint	yes		no		no	0.01s
✅ REPOSITORY	secretlint	yes		no		no	5.38s
✅ REPOSITORY	syft	yes		no		no	2.39s
✅ REPOSITORY	trivy	yes		no		no	9.3s
✅ REPOSITORY	trivy-sbom	yes		no		no	0.66s
✅ REPOSITORY	trufflehog	yes		no		no	3.43s
⚠️ SPELL	lychee	73		1		0	12.57s
✅ YAML	prettier	13	1	0		0	0.71s
✅ YAML	v8r	13		0		0	5.58s
✅ YAML	yamllint	13		0		0	0.65s

Detailed Issues

⚠️ SPELL / lychee - 1 error

📝 Summary
---------------------
🔍 Total..........168
🔗 Unique.........162
✅ Successful.....167
⏳ Timeouts.........0
🔀 Redirected......74
👻 Excluded.........0
❓ Unknown..........0
🚫 Errors...........1
⛔ Unsupported......1

Errors in CONTRIBUTING.md
[404] https://github.com/yourname/amp-cucumber-cpp-runner.git (at 41:35) | Rejected status code: 404 Not Found | Followed 1 redirect. Redirects: https://github.com/yourname/amp-cucumber-cpp-runner.git --[301]--> https://github.com/yourname/amp-cucumber-cpp-runner

Hint: Followed 74 redirects. You might want to consider replacing redirecting URLs with the resolved URLs. Use verbose mode (`-v`/`-vv`) to see redirection details.
Hint: You can configure accepted/rejected response codes with `-a` or `--accept`

⚠️ MARKDOWN / markdownlint - 20 errors

CHANGELOG.md:31 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Features"]
CHANGELOG.md:38 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Bug Fixes"]
CHANGELOG.md:44 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Chores"]
CHANGELOG.md:51 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Features"]
CHANGELOG.md:58 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Chores"]
CHANGELOG.md:66 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "⚠ BREAKING CHANGES"]
CHANGELOG.md:70 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Features"]
CHANGELOG.md:79 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Features"]
CHANGELOG.md:85 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Chores"]
CHANGELOG.md:93 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "⚠ BREAKING CHANGES"]
CHANGELOG.md:97 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Features"]
CHANGELOG.md:102 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Bug Fixes"]
CHANGELOG.md:111 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Features"]
CHANGELOG.md:122 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Chores"]
CHANGELOG.md:130 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "⚠ BREAKING CHANGES"]
CHANGELOG.md:134 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Features"]
CHANGELOG.md:159 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Bug Fixes"]
CHANGELOG.md:166 error MD024/no-duplicate-heading Multiple headings with the same content [Context: "Chores"]
cmake/WindowsToolchainFilesProvidedBy.md:1 error MD041/first-line-heading/first-line-h1 First line in a file should be a top-level heading [Context: "<https://github.com/MarkSchofi..."]
README.md:132 error MD040/fenced-code-language Fenced code blocks should have a language specified [Context: "```"]

Notices

⚠️ Your configuration references items that have been removed from MegaLinter and are ignored: REPOSITORY_GITLEAKS, REPOSITORY_GOODCHECK, REPOSITORY_KICS. See Removed linters to find their replacements.

See detailed reports in MegaLinter artifacts

Your project could benefit from a custom flavor, which would allow you to run only the linters you need, and thus improve runtime performances. (Skip this info by defining FLAVOR_SUGGESTIONS: false)

• Documentation: Custom Flavors
• Command: npx mega-linter-runner@10.0.0 --custom-flavor-setup --custom-flavor-linters ACTION_ACTIONLINT,ACTION_ZIZMOR,CPP_CLANG_FORMAT,DOCKERFILE_HADOLINT,MARKDOWN_MARKDOWNLINT,MARKDOWN_MARKDOWN_TABLE_FORMATTER,REPOSITORY_GIT_DIFF,REPOSITORY_BETTERLEAKS,REPOSITORY_GRYPE,REPOSITORY_LS_LINT,REPOSITORY_SECRETLINT,REPOSITORY_SYFT,REPOSITORY_TRIVY,REPOSITORY_TRIVY_SBOM,REPOSITORY_TRUFFLEHOG,SPELL_LYCHEE,YAML_PRETTIER,YAML_YAMLLINT,YAML_V8R

Show us your support by starring ⭐ the repository

[sonarqubecloud]

Quality Gate passed

Issues
0 New issues
0 Accepted issues

Measures
0 Security Hotspots
0.0% Coverage on New Code
0.0% Duplication on New Code

See analysis details on SonarQube Cloud