Added sensecap indicator init code

api_drivers/common_api_drivers/display/st7701/_st7701_type17.py

@@ -0,0 +1,152 @@
+import time
+
+
+# Sensecap Indicator
+def init(self):
+    param_buf = bytearray(16)
+    param_mv = memoryview(param_buf)
+
+    param_buf[:5] = bytearray([0x77, 0x01, 0x00, 0x00, 0x10])
+    self.set_params(0xFF, param_mv[:5])
+
+    param_buf[:2] = bytearray([0x3B, 0x00])
+    self.set_params(0xC0, param_mv[:2])
+
+    param_buf[:2] = bytearray([0x0D, 0x02])
+    self.set_params(0xC1, param_mv[:2])
+
+    param_buf[:2] = bytearray([0x31, 0x05])
+    self.set_params(0xC2, param_mv[:2])
+
+    param_buf[:1] = bytearray([0x04])
+    self.set_params(0xC7, param_mv[:1])
+
+    # changed by manufacture
+    param_buf[0] = 0x08
+    self.set_params(0xCD, param_mv[:1])
+
+    # Positive Voltage Gamma Control
+    param_buf[:16] = bytearray([
+        0x00, 0x11, 0x18, 0x0E, 0x11, 0x06, 0x07, 0x08,
+        0x07, 0x22, 0x04, 0x12, 0x0F, 0xAA, 0x31, 0x18])
+    self.set_params(0xB0, param_mv[:16])
+
+    # Negative Voltage Gamma Control
+    param_buf[:16] = bytearray([
+        0x00, 0x11, 0x19, 0x0E, 0x12, 0x07, 0x08, 0x08,
+        0x08, 0x22, 0x04, 0x11, 0x11, 0xA9, 0x32, 0x18])
+    self.set_params(0xB1, param_mv[:16])
+
+    # PAGE1
+    param_buf[:5] = bytearray([0x77, 0x01, 0x00, 0x00, 0x11])
+    self.set_params(0xFF, param_mv[:5])
+
+    # Vop=4.7375v
+    param_buf[0] = 0x60
+    self.set_params(0xB0, param_mv[:1])
+
+    # VCOM=32
+    param_buf[0] = 0x32
+    self.set_params(0xB1, param_mv[:1])
+
+    # VGH=15v
+    param_buf[0] = 0x07
+    self.set_params(0xB2, param_mv[:1])
+
+    param_buf[0] = 0x80
+    self.set_params(0xB3, param_mv[:1])
+
+    # VGL=-10.17v
+    param_buf[0] = 0x49
+    self.set_params(0xB5, param_mv[:1])
+
+    param_buf[0] = 0x85
+    self.set_params(0xB7, param_mv[:1])
+
+    # AVDD=6.6 & AVCL=-4.6
+    param_buf[0] = 0x21
+    self.set_params(0xB8, param_mv[:1])
+
+    param_buf[0] = 0x78
+    self.set_params(0xC1, param_mv[:1])
+
+    param_buf[0] = 0x78
+    self.set_params(0xC2, param_mv[:1])
+
+    time.sleep_ms(20)
+
+    param_buf[:3] = bytearray([0x00, 0x1B, 0x02])
+    self.set_params(0xE0, param_mv[:3])
+
+    param_buf[:11] = bytearray([
+        0x08, 0xA0, 0x00, 0x00, 0x07, 0xA0,
+        0x00, 0x00, 0x00, 0x44, 0x44])
+    self.set_params(0xE1, param_mv[:11])
+
+    param_buf[:12] = bytearray([
+        0x11, 0x11, 0x44, 0x44, 0xED, 0xA0,
+        0x00, 0x00, 0xEC, 0xA0, 0x00, 0x00])
+    self.set_params(0xE2, param_mv[:12])
+
+    param_buf[:4] = bytearray([0x00, 0x00, 0x11, 0x11])
+    self.set_params(0xE3, param_mv[:4])
+
+    param_buf[:2] = bytearray([0x44, 0x44])
+    self.set_params(0xE4, param_mv[:2])
+
+    param_buf[:16] = bytearray([
+        0x0A, 0xE9, 0xD8, 0xA0, 0x0C, 0xEB, 0xD8, 0xA0,
+        0x0E, 0xED, 0xD8, 0xA0, 0x10, 0xEF, 0xD8, 0xA0])
+    self.set_params(0xE5, param_mv[:16])
+
+    param_buf[:4] = bytearray([0x00, 0x00, 0x11, 0x11])
+    self.set_params(0xE6, param_mv[:4])
+
+    param_buf[:2] = bytearray([0x44, 0x44])
+    self.set_params(0xE7, param_mv[:2])
+
+    param_buf[:16] = bytearray([
+        0x09, 0xE8, 0xD8, 0xA0, 0x0B, 0xEA, 0xD8, 0xA0,
+        0x0D, 0xEC, 0xD8, 0xA0, 0x0F, 0xEE, 0xD8, 0xA0])
+    self.set_params(0xE8, param_mv[:16])
+
+    param_buf[:7] = bytearray([0x02, 0x00, 0xE4, 0xE4, 0x88, 0x00, 0x40])
+    self.set_params(0xEB, param_mv[:7])
+
+    param_buf[:2] = bytearray([0x3C, 0x00])
+    self.set_params(0xEC, param_mv[:2])
+
+    param_buf[:16] = bytearray([
+        0xAB, 0x89, 0x76, 0x54, 0x02, 0xFF, 0xFF, 0xFF,
+        0xFF, 0xFF, 0xFF, 0x20, 0x45, 0x67, 0x98, 0xBA])
+    self.set_params(0xED, param_mv[:16])
+
+    param_buf[:1] = bytearray([0x10])
+    self.set_params(0x36, param_mv[:1])
+
+    # -----------VAP & VAN---------------
+    param_buf[:5] = bytearray([0x77, 0x01, 0x00, 0x00, 0x13])
+    self.set_params(0xFF, param_mv[:5])
+
+    param_buf[0] = 0xE4
+    self.set_params(0xE5, param_mv[:1])
+
+    param_buf[:5] = bytearray([0x77, 0x01, 0x00, 0x00, 0x00])
+    self.set_params(0xFF, param_mv[:5])
+
+    # 0x70 RGB888, 0x60 RGB666, 0x50 RGB565
+    param_buf[0] = 0x60
+    self.set_params(0x3A, param_mv[:1])
+
+    # Display Inversion On
+    self.set_params(0x21)
+
+    # Sleep Out
+    self.set_params(0x11)
+
+    time.sleep_ms(120)  # NOQA
+
+    # Display On
+    self.set_params(0x29)
+
+    time.sleep_ms(120)  # NOQA

api_drivers/common_api_drivers/display/st7701/st7701.py

@@ -211,7 +211,7 @@ def __init__(
         )
 
     def _spi_3wire_init(self, type):  # NOQA
-        if type < 1 or type > 16:
+        if type < 1 or type > 17:
             raise RuntimeError('Invalid display type')
 
         mod_name = f'_st7701_type{type}'

spi3wire.pyi

@@ -12,7 +12,6 @@ class Spi3Wire:
         use_dc_bit: bool = True,
         dc_zero_on_data: bool = False,
         lsb_first: bool = False,
-        dc_data_high: bool = True,
         cs_high_active: bool = False,
         del_keep_cs_inactive: bool = False,
     ):