I design and build embedded systems and electronics: from logic-gate computers on breadboards to custom PCBs, firmware and 3D-printed enclosures.
- Firmware: C/C++ on ATmega328P and Arduino Nano (timers, interrupts, shift registers, SPI, EEPROM)
- Hardware design: schematics and PCB layout in EasyEDA, fabricated through JLCPCB, hand-soldered through-hole and SMD
- Digital and analog circuits: discrete logic, ALUs, ADC/DAC, oscillators, power regulation
- Test and measurement: multimeter and oscilloscope debugging
- Fabrication: 3D-printed cases designed to fit each board
| Project | What it is |
|---|---|
| CHUMP 4-bit computer | A working 4-bit CPU built from TTL logic: clock, ALU, RAM, EEPROM microcode |
| ACES Smart Drone | nRF24L01 radio controller and quadcopter with ESC control and a failsafe |
| ACES Battery Station | Regulated bench supply and NiMH smart charger with LCD readout |
| CharlieClock | A 132-LED Charlieplexed clock on a custom controller PCB |
| SAR ADC | A 7-bit successive-approximation ADC from discrete logic and analog parts |
| LCD Pocket Emitter | Handheld IR and RF code copier with an LCD menu |
| Project | Focus |
|---|---|
| chump-4bit-computer | CPU architecture, microcode, ALU |
| sar-adc | Analog/digital conversion |
| r2r-dac | Digital-to-analog conversion, PCB, case |
| aces-smart-drone | Wireless control, PWM/ESC |
| aces-battery-station | Power regulation and charging |
| charlieclock | Charlieplexing, crystal timekeeping |
| rpn-calculator | Stack data structure, keypad and LCD |
| led-tic-tac-toe | Shift registers, game logic |
| lcd-pocket-emitter | IR/RF protocols |
| matrixmadeez-v2-led-matrix | Persistence of vision, EEPROM font |
| arduino-reaction-game | Timing, displays |
| unpacked-595-gcd-calculator | Shift register from flip-flops |
| unpacked-555-timer | 555 timer, rebuilt from parts |
| digital-electronics-labs | KVL, oscillators, adders, counters, SMD |
| teddy-bear-wheelchair-challenge | Motor control (in progress) |
Every project repo follows the same layout: a README with the theory, build process and lessons learned, firmware/ for code, hardware/ for design files and docs/images/ for schematics and photos.