UI never sends M408 S1 command with Repetier-Firmware

[romekb]

Hi !
I testing ESPRINTER with last Repetier code.
I get Machine name, firmware version and file listings but no current machine status.
After debugging serial commands from ESP8266 to Repetier I found a M117 commands (info), M408 S2, M408 S5, M20 S2 and M36 (sd listing) commands.
No any M408 S0/S1, and no current parameters displayed.
Axis control work, I can start printing via web interface, sending G commands work to.
No any status data, themperatures ect (no M408 S0/S1) commands from ESP8266.
Tested with Firefox and Chrome with the same result.

[toxuin]

Are you sending the requests, but having no responses? (like, being disconnected from the web interface) Or the web interface just never asks for data (not sending M408 S1)?

[romekb]

Web interface never asks for data (never send M408 S1)
But after click connect on web page, web interface send M408 S2 , then M408 S5.
But never M408 S1.

[toxuin]

I've done some investigating and am testing a fix now. Will update the repo soon.

[romekb]

Ok. I can test it too.
But I found one more problem. The buttons on confirmation windows (after file uploading, after click ATX power off or after click "Return to defaults") are not clicable. If I click on these button, the window go out, but action is not executed. Only way to click these buttons is select it via keyboard TAB key, then press ENTER on keyboard.

[toxuin]

That's really weird. I've tested it on latest Chromium and Firefox – both seem to work fine.
Do you get any errors in your browser's console?

[romekb]

Log from Firefox console:

GET XHR http://192.168.1.15/rr_connect [HTTP/1.1 200 OK 891ms]
GET XHR http://192.168.1.15/rr_status [HTTP/1.1 200 OK 127ms]
TypeError: e.coords is undefined ugly.min.js.gz:1:4822
GET XHR http://192.168.1.15/rr_files [HTTP/1.1 200 OK 155ms]
TypeError: e.files is undefined ugly.min.js.gz:1:13864
GET XHR http://192.168.1.15/rr_config [HTTP/1.1 200 OK 157ms]
GET XHR http://192.168.1.15/rr_gcode [HTTP/1.1 200 OK 186ms]
GET XHR http://192.168.1.15/rr_files [HTTP/1.1 200 OK 174ms]
GET XHR http://192.168.1.15/rr_fileinfo [HTTP/1.1 200 OK 178ms]
GET XHR http://192.168.1.15/rr_fileinfo [HTTP/1.1 200 OK 180ms]
GET XHR http://192.168.1.15/rr_fileinfo [HTTP/1.1 200 OK 258ms]
GET XHR http://192.168.1.15/rr_fileinfo [HTTP/1.1 200 OK 256ms]
GET XHR http://192.168.1.15/rr_fileinfo [HTTP/1.1 200 OK 316ms]
GET XHR http://192.168.1.15/rr_fileinfo [HTTP/1.1 200 OK 240ms]
GET XHR http://192.168.1.15/rr_fileinfo [HTTP/1.1 200 OK 277ms]

Maybe my module (ESP-01 upgraded to 2MB of flash) are weird ?

[toxuin]

It is hard to tell, but shouldn't be the case.
I'll test the latest changes on my machine over the weekend and push the update.

[Toshik]

@romekb Did you build Repetier firmware with ESP8266 Duet JSON data support?

[romekb]

Of course.
And send some fixes to Roland, because firmware has bug in "GCodeFileInfo::init" function.
I'm AVR 'C' programer :-)

[toxuin]

Okay, I see the culprit now. It is a bug in Repetier-Firmware. That's my fault it's there. I've submitted a patch.
For the UI popup bug – we should open another issue since those two aren't connected.

[romekb]

Ok, now I wait for new ESP12 module to exclude an hardware problem, and apply Your patch to repetier code, then test it.