ugfx/CUBE0414: swap t0_* and t1_* register addresses

Author: redchenjs

components/ugfx/drivers/gdisp/CUBE0414/gdisp_lld_CUBE0414.c

@@ -86,12 +86,12 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     gfxSleepMilliseconds(120);
 
     write_cmd(g, CUBE0414_CONF_WR);     //  1: Set write reg conf, 6 args, no delay:
-        write_data(g, CONFIG_CUBE0414_LED_T1H / 10);    // T1H Time (ns)
-        write_data(g, CONFIG_CUBE0414_LED_T1L / 10);    // T1L Time (ns)
-        write_data(g, CONFIG_CUBE0414_LED_T0H / 10);    // T0H Time (ns)
-        write_data(g, CONFIG_CUBE0414_LED_T0L / 10);    // T0L Time (ns)
-        write_data(g, CONFIG_CUBE0414_LED_RST * 100 >> 8);    // RST Time H (us)
-        write_data(g, CONFIG_CUBE0414_LED_RST * 100 & 0xff);  // RST Time L (us)
+        write_data(g, CONFIG_CUBE0414_LED_T0H / 10);    // T0H Time: val * 10 ns
+        write_data(g, CONFIG_CUBE0414_LED_T0L / 10);    // T0L Time: val * 10 ns
+        write_data(g, CONFIG_CUBE0414_LED_T1H / 10);    // T1H Time: val * 10 ns
+        write_data(g, CONFIG_CUBE0414_LED_T1L / 10);    // T1L Time: val * 10 ns
+        write_data(g, CONFIG_CUBE0414_LED_RST * 100 >> 8);    // RST Time H: val * 10 ns
+        write_data(g, CONFIG_CUBE0414_LED_RST * 100 & 0xff);  // RST Time L: val * 10 ns
     write_cmd(g, CUBE0414_ADDR_WR);     //  2: Set write ram addr, 64 args, no delay:
         write_buff(g, (uint8_t *)ram_addr_table, sizeof(ram_addr_table));
     write_cmd(g, CUBE0414_DATA_WR);     //  3: Set write ram data, N args, no delay:

main/Kconfig.projbuild

@@ -244,18 +244,6 @@ config CUBE0414_COLOR_GRB
     bool "GRB"
 endchoice
 
-config CUBE0414_LED_T1H
-    int "CUBE0414 LED T1H Time (ns)"
-    default 1360
-    range 10 2500
-    depends on ENABLE_VFX && VFX_OUTPUT_CUBE0414
-
-config CUBE0414_LED_T1L
-    int "CUBE0414 LED T1L Time (ns)"
-    default 350
-    range 10 2500
-    depends on ENABLE_VFX && VFX_OUTPUT_CUBE0414
-
 config CUBE0414_LED_T0H
     int "CUBE0414 LED T0H Time (ns)"
     default 350
@@ -268,6 +256,18 @@ config CUBE0414_LED_T0L
     range 10 2500
     depends on ENABLE_VFX && VFX_OUTPUT_CUBE0414
 
+config CUBE0414_LED_T1H
+    int "CUBE0414 LED T1H Time (ns)"
+    default 1360
+    range 10 2500
+    depends on ENABLE_VFX && VFX_OUTPUT_CUBE0414
+
+config CUBE0414_LED_T1L
+    int "CUBE0414 LED T1L Time (ns)"
+    default 350
+    range 10 2500
+    depends on ENABLE_VFX && VFX_OUTPUT_CUBE0414
+
 config CUBE0414_LED_RST
     int "CUBE0414 LED RST Time (us)"
     default 280