Update instructions and build targets to reflect use of STM32CubeProgrammer.

Author: tmiw

stm32/CMakeLists.txt

@@ -114,21 +114,11 @@ include(cmake/STM32_Lib.cmake)
 # Macro for elf->bin
 macro(elf2bin target)
     add_custom_command(TARGET ${target}
-    POST_BUILD COMMAND ${CMAKE_OBJCOPY} -O binary ${target}.elf ${target}.bin
+    POST_BUILD COMMAND ${CMAKE_OBJCOPY} -O binary ${target}.elf ${target}.bin && ${CMAKE_OBJCOPY} -O ihex ${target}.elf ${target}.hex
     COMMENT "Creating binary for ${target}")
     set_source_files_properties(${target}.bin PROPERTIES GENERATED TRUE)
     set_property(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}" APPEND PROPERTY
-    ADDITIONAL_MAKE_CLEAN_FILES ${target}.bin)
-endmacro()
-
-# Macro for elf->bin
-macro(elf2dfu target)
-    add_custom_command(TARGET ${target}
-            POST_BUILD COMMAND ${CMAKE_OBJCOPY} -O ihex ${target}.elf ${target}.hex && ${CMAKE_SOURCE_DIR}/support/hex2dfu.py ${target}.hex ${target}.dfu
-    COMMENT "Creating dfu file for ${target}")
-    set_source_files_properties(${target}.bin PROPERTIES GENERATED TRUE)
-    set_property(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}" APPEND PROPERTY
-    ADDITIONAL_MAKE_CLEAN_FILES ${target}.hex ${target}.dfu)
+    ADDITIONAL_MAKE_CLEAN_FILES ${target}.bin ${target}.hex)
 endmacro()
 
 # This macro just adds generation of a map file with the same name as the executable and .map suffix
@@ -318,4 +308,3 @@ add_mapped_executable(sm1000v5 ${SM1000_SRCS} ${SYSTEM_SRCS})
 target_link_libraries(sm1000v5 stm32f4_adac stm32f4 CMSIS)
 target_compile_options(sm1000v5 PRIVATE "-O3")
 elf2bin(sm1000v5)
-elf2dfu(sm1000v5)

stm32/doc/sm1000_manual.md

@@ -102,29 +102,27 @@ Settings are saved when you hold down BACK to leave the root menu.
 
 You can program the flash memory on your SM1000 via USB using a Windows or Linux PC. Download the latest SM1000 firmware here:
 
-   Version | Date | Download .bin | Download .dfu | Release Notes
+   Version | Date | Download .bin | Release Notes
    :---: | --- | --- | --- | --- |
-   1   | May 2015 | [sm1000.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000.bin) | | Original release with FreeDV 1600
-   2   | July 2019 | [sm1000v2.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v2.bin) |  [sm1000v2.dfu](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v2.dfu) | FreeDV 700D and morse menus
-   3   | March 2020 | [sm1000v3.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v3.bin) |  [sm1000v3.dfu](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v3.dfu) | Menu bug fixes, 700D modem improvements & automatic Mic EQ
-   4   | May 2020 | [sm1000v4.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v4.bin) |  [sm1000v4.dfu](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v4.dfu) | 700D sync logic to reduce stop burbling with no signal
-   5   | August 2021 | [sm1000v5.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v5.bin) |  [sm1000v5.dfu](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v5.dfu) | FreeDV 700E and Tx band pass filter for 700D & E
+   1   | May 2015 | [sm1000.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000.bin) | Original release with FreeDV 1600
+   2   | July 2019 | [sm1000v2.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v2.bin) | FreeDV 700D and morse menus
+   3   | March 2020 | [sm1000v3.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v3.bin) | Menu bug fixes, 700D modem improvements & automatic Mic EQ
+   4   | May 2020 | [sm1000v4.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v4.bin) | 700D sync logic to reduce stop burbling with no signal
+   5   | August 2021 | [sm1000v5.bin](http://www.rowetel.com/downloads/codec2/smartmic/sm1000v5.bin) | FreeDV 700E and Tx band pass filter for 700D & E
 
 ## Windows
 
-Find and install the **DfuSeDemo** software by searching on the [ST web site](http://www.st.com).
-
-For Windows use the ```.dfu``` firmware file provided above:
+Find and install the **STM32CubeProgrammer** software by searching on the [ST web site](http://www.st.com).
 
 1. Connect the SM1000 USB to a Windows PC.
-1. Run the ```DfuSeDemo``` Application.
+1. Run the ```STM32CubeProgrammer``` application and navigate to the "Erasing & Programming" section..
 1. Apply power with PTT held down, then release PTT.
-1. The ```Available DFU Devices``` window should show ```STM Device in DFU Mode```. If not, use the arrow to select that option. Verify it shows a ```Vender ID``` of 0483, and a ```Product ID``` of DF11.
-1. In the lower right quadrant of the screen, under ```Upgrade or Verify Action``` select ```Choose```.
-1. Locate your DFU file you want to program into the SM1000, and press ```Open```.
-1. Select ```Verify after download``` option.
-1. Select ```Upgrade``` and confirm ```Yes``` when asked, and the firmware procedure will commence.
-1. A message when complete that it was successful. If the message returns that it was unsuccessful, then first try the ```Upgrade``` again. If the upgrade fails twice, you may have to start this complete procedure again.
+1. Seelct "USB" from the drop-down list on the upper right and push the Refresh button next to the Port drop-down in the "USB configuration" area. The SM1000 will appear as "USB1" or similar in the list; select that entry.
+1. Ensure that "PID" displays as DF11 and "VID" as 0483.
+1. In the "File path" on the left-hand side, navigate to the .bin file you'd like to flash.
+1. Select the ```Verify programming``` option.
+1. Select ```Start Programming``` and the firmware procedure will commence.
+1. A message in the log at the bottom of the window will display once complete.
 
 Power cycle the SM1000 and the new firmware will run.