Merge pull request #624 from cjakeman/menu-option04

Menu option04 - invert controls

Author: cesarBLG

Source/Documentation/Manual/images/options-simulation.png

@@ -136,10 +136,10 @@ These windows use the abbreviations *t-us* for short tons (2000 lb),
 Note: The units displayed by the :ref:`F4 Track Monitor <driving-track-monitor>` (e.g. velocity and
 distance) are always based on data read from the route files.
 
-Disable TCS scripts
+Enable TCS scripts
 -------------------
 
-This option disables the train control system scripts for locomotives where
+This option enables the train control system scripts for locomotives where
 these have been implemented.
 
 .. _options-web-server-port:
@@ -385,10 +385,12 @@ displayed as a message. This option is described in detail
 OR does not display the damage.
 
 
-Steam locomotive hot start
---------------------------
+At game start, Steam - pre-heat boiler
+--------------------------------------
 
 With this option selected, the temperature and pressure of steam in the boiler is ready to pull the train.
+Uncheck this option for a more detailed behaviour in which the player has to raise the boiler pressure.
+
 If not, the boiler pressure will be at 2/3 of maximum, which is only adequate for light work.
 If your schedule gives you time to raise the pressure close to maximum, then 
 switch from AI Firing to Manual Firing (Ctrl+F) and increase the Blower (N) to 100% to raise a draught. 
@@ -397,6 +399,16 @@ Full pressure may be reached in 5 minutes or so.
 
 The default setting is checked.
 
+
+At game start, Diesel - run engines
+-----------------------------------
+
+When this option is checked, stationary diesel locos start the simulation with their engines running.
+Uncheck this option for a more detailed behaviour in which the player has to start the loco's engine.
+
+The default setting is checked.
+
+
 .. _options-forced-red:
 
 Forced red at station stops
@@ -466,14 +478,6 @@ With vacuum braking, it is sometimes necessary to operate two different controls
 With "Simple control and physics" checked, the player is able to operate the brakes just with the brake valve 
 and doesn't need to consider the steam ejector separately.
 
-Diesel engines stopped at simulation start
-------------------------------------------
-
-When this option is unchecked, stationary diesel locos start the simulation with their engines running.
-Check this option for a more detailed behaviour in which the player has to start the loco's engine.
-
-The default setting is unchecked.
-
 
 .. _options-keyboard: