diff --git a/.ideavimrc b/.ideavimrc new file mode 100644 index 00000000000..b7fbe32ac52 --- /dev/null +++ b/.ideavimrc @@ -0,0 +1,46 @@ +set scrolloff=5 + +set incsearch + +let mapleader = " " + +set clipboard+=unnamedplus + +" Don't use Ex mode, use Q for formatting. +map Q gq + +" --- Enable IdeaVim plugins https://jb.gg/ideavim-plugins + +" Highlight copied text +Plug 'machakann/vim-highlightedyank' +" Commentary plugin +Plug 'tpope/vim-commentary' + +set NERDTree + +nnoremap :action GotoFile +nnoremap gc :action TextSearchAction +nnoremap e :action ActivateProjectToolWindow +nnoremap cd :action ShowErrorDescription + +nnoremap cr :action RenameElement +nnoremap bd :action CloseContent +nnoremap bo :action CloseAllEditorsButActive + +inoremap :action EditorChooseLookupItem + +nnoremap h +nnoremap j +nnoremap k +nnoremap l + +nnoremap :action PreviousTab +nnoremap :action NextTab + +nnoremap h :action ActivateProjectToolWindow +nnoremap j :action ActivateRunToolWindow +nnoremap k :action ActivateFindToolWindow +nnoremap l :action ActivateTerminalToolWindow + +autocmd FileType nerdtree nmap l NERDTreeExpand +autocmd FileType nerdtree nmap h NERDTreeCollapse diff --git a/README.md b/README.md index 2b9e52dad85..fcb1c454b74 100644 --- a/README.md +++ b/README.md @@ -1,322 +1 @@ -# kickstart.nvim - -## Introduction - -A starting point for Neovim that is: - -* Small -* Single-file -* Completely Documented - -**NOT** a Neovim distribution, but instead a starting point for your configuration. - -## Installation - -### Install Neovim - -Kickstart.nvim targets *only* the latest -['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest -['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim. -If you are experiencing issues, please make sure you have at least the latest -stable version. Most likely, you want to install neovim via a [package -manager](https://github.com/neovim/neovim/blob/master/INSTALL.md#install-from-package). -To check your neovim version, run `nvim --version` and make sure it is not -below the latest -['stable'](https://github.com/neovim/neovim/releases/tag/stable) version. If -your chosen install method only gives you an outdated version of neovim, find -alternative [installation methods below](#alternative-neovim-installation-methods). - -### Install External Dependencies - -External Requirements: -- Basic utils: `git`, `make`, `unzip`, C Compiler (`gcc`) -- [ripgrep](https://github.com/BurntSushi/ripgrep#installation), - [fd-find](https://github.com/sharkdp/fd#installation) -- Clipboard tool (xclip/xsel/win32yank or other depending on the platform) -- A [Nerd Font](https://www.nerdfonts.com/): optional, provides various icons - - if you have it set `vim.g.have_nerd_font` in `init.lua` to true -- Emoji fonts (Ubuntu only, and only if you want emoji!) `sudo apt install fonts-noto-color-emoji` -- Language Setup: - - If you want to write Typescript, you need `npm` - - If you want to write Golang, you will need `go` - - etc. - -> [!NOTE] -> See [Install Recipes](#Install-Recipes) for additional Windows and Linux specific notes -> and quick install snippets - -### Install Kickstart - -> [!NOTE] -> [Backup](#FAQ) your previous configuration (if any exists) - -Neovim's configurations are located under the following paths, depending on your OS: - -| OS | PATH | -| :- | :--- | -| Linux, MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` | -| Windows (cmd)| `%localappdata%\nvim\` | -| Windows (powershell)| `$env:LOCALAPPDATA\nvim\` | - -#### Recommended Step - -[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo -so that you have your own copy that you can modify, then install by cloning the -fork to your machine using one of the commands below, depending on your OS. - -> [!NOTE] -> Your fork's URL will be something like this: -> `https://github.com//kickstart.nvim.git` - -You likely want to remove `lazy-lock.json` from your fork's `.gitignore` file -too - it's ignored in the kickstart repo to make maintenance easier, but it's -[recommended to track it in version control](https://lazy.folke.io/usage/lockfile). - -#### Clone kickstart.nvim - -> [!NOTE] -> If following the recommended step above (i.e., forking the repo), replace -> `nvim-lua` with `` in the commands below - -
Linux and Mac - -```sh -git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim -``` - -
- -
Windows - -If you're using `cmd.exe`: - -``` -git clone https://github.com/nvim-lua/kickstart.nvim.git "%localappdata%\nvim" -``` - -If you're using `powershell.exe` - -``` -git clone https://github.com/nvim-lua/kickstart.nvim.git "${env:LOCALAPPDATA}\nvim" -``` - -
- -### Post Installation - -Start Neovim - -```sh -nvim -``` - -That's it! Lazy will install all the plugins you have. Use `:Lazy` to view -the current plugin status. Hit `q` to close the window. - -#### Read The Friendly Documentation - -Read through the `init.lua` file in your configuration folder for more -information about extending and exploring Neovim. That also includes -examples of adding popularly requested plugins. - -> [!NOTE] -> For more information about a particular plugin check its repository's documentation. - - -### Getting Started - -[The Only Video You Need to Get Started with Neovim](https://youtu.be/m8C0Cq9Uv9o) - -### FAQ - -* What should I do if I already have a pre-existing Neovim configuration? - * You should back it up and then delete all associated files. - * This includes your existing init.lua and the Neovim files in `~/.local` - which can be deleted with `rm -rf ~/.local/share/nvim/` -* Can I keep my existing configuration in parallel to kickstart? - * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME` - to maintain multiple configurations. For example, you can install the kickstart - configuration in `~/.config/nvim-kickstart` and create an alias: - ``` - alias nvim-kickstart='NVIM_APPNAME="nvim-kickstart" nvim' - ``` - When you run Neovim using `nvim-kickstart` alias it will use the alternative - config directory and the matching local directory - `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim - distribution that you would like to try out. -* What if I want to "uninstall" this configuration: - * See [lazy.nvim uninstall](https://lazy.folke.io/usage#-uninstalling) information -* Why is the kickstart `init.lua` a single file? Wouldn't it make sense to split it into multiple files? - * The main purpose of kickstart is to serve as a teaching tool and a reference - configuration that someone can easily use to `git clone` as a basis for their own. - As you progress in learning Neovim and Lua, you might consider splitting `init.lua` - into smaller parts. A fork of kickstart that does this while maintaining the - same functionality is available here: - * [kickstart-modular.nvim](https://github.com/dam9000/kickstart-modular.nvim) - * Discussions on this topic can be found here: - * [Restructure the configuration](https://github.com/nvim-lua/kickstart.nvim/issues/218) - * [Reorganize init.lua into a multi-file setup](https://github.com/nvim-lua/kickstart.nvim/pull/473) - -### Install Recipes - -Below you can find OS specific install instructions for Neovim and dependencies. - -After installing all the dependencies continue with the [Install Kickstart](#install-kickstart) step. - -#### Windows Installation - -
Windows with Microsoft C++ Build Tools and CMake -Installation may require installing build tools and updating the run command for `telescope-fzf-native` - -See `telescope-fzf-native` documentation for [more details](https://github.com/nvim-telescope/telescope-fzf-native.nvim#installation) - -This requires: - -- Install CMake and the Microsoft C++ Build Tools on Windows - -```lua -{'nvim-telescope/telescope-fzf-native.nvim', build = 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build' } -``` -
-
Windows with gcc/make using chocolatey -Alternatively, one can install gcc and make which don't require changing the config, -the easiest way is to use choco: - -1. install [chocolatey](https://chocolatey.org/install) -either follow the instructions on the page or use winget, -run in cmd as **admin**: -``` -winget install --accept-source-agreements chocolatey.chocolatey -``` - -2. install all requirements using choco, exit the previous cmd and -open a new one so that choco path is set, and run in cmd as **admin**: -``` -choco install -y neovim git ripgrep wget fd unzip gzip mingw make -``` -
-
WSL (Windows Subsystem for Linux) - -``` -wsl --install -wsl -sudo add-apt-repository ppa:neovim-ppa/unstable -y -sudo apt update -sudo apt install make gcc ripgrep unzip git xclip neovim -``` -
- -#### Linux Install -
Ubuntu Install Steps - -``` -sudo add-apt-repository ppa:neovim-ppa/unstable -y -sudo apt update -sudo apt install make gcc ripgrep unzip git xclip neovim -``` -
-
Debian Install Steps - -``` -sudo apt update -sudo apt install make gcc ripgrep unzip git xclip curl - -# Now we install nvim -curl -LO https://github.com/neovim/neovim/releases/latest/download/nvim-linux-x86_64.tar.gz -sudo rm -rf /opt/nvim-linux-x86_64 -sudo mkdir -p /opt/nvim-linux-x86_64 -sudo chmod a+rX /opt/nvim-linux-x86_64 -sudo tar -C /opt -xzf nvim-linux-x86_64.tar.gz - -# make it available in /usr/local/bin, distro installs to /usr/bin -sudo ln -sf /opt/nvim-linux-x86_64/bin/nvim /usr/local/bin/ -``` -
-
Fedora Install Steps - -``` -sudo dnf install -y gcc make git ripgrep fd-find unzip neovim -``` -
- -
Arch Install Steps - -``` -sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim -``` -
- -### Alternative neovim installation methods - -For some systems it is not unexpected that the [package manager installation -method](https://github.com/neovim/neovim/blob/master/INSTALL.md#install-from-package) -recommended by neovim is significantly behind. If that is the case for you, -pick one of the following methods that are known to deliver fresh neovim versions very quickly. -They have been picked for their popularity and because they make installing and updating -neovim to the latest versions easy. You can also find more detail about the -available methods being discussed -[here](https://github.com/nvim-lua/kickstart.nvim/issues/1583). - - -
Bob - -[Bob](https://github.com/MordechaiHadad/bob) is a Neovim version manager for -all plattforms. Simply install -[rustup](https://rust-lang.github.io/rustup/installation/other.html), -and run the following commands: - -```bash -rustup default stable -rustup update stable -cargo install bob-nvim -bob use stable -``` - -
- -
Homebrew - -[Homebrew](https://brew.sh) is a package manager popular on Mac and Linux. -Simply install using [`brew install`](https://formulae.brew.sh/formula/neovim). - -
- -
Flatpak - -Flatpak is a package manager for applications that allows developers to package their applications -just once to make it available on all Linux systems. Simply [install flatpak](https://flatpak.org/setup/) -and setup [flathub](https://flathub.org/setup) to [install neovim](https://flathub.org/apps/io.neovim.nvim). - -
- -
asdf and mise-en-place - -[asdf](https://asdf-vm.com/) and [mise](https://mise.jdx.dev/) are tool version managers, -mostly aimed towards project-specific tool versioning. However both support managing tools -globally in the user-space as well: - -
mise - -[Install mise](https://mise.jdx.dev/getting-started.html), then run: - -```bash -mise plugins install neovim -mise use neovim@stable -``` - -
- -
asdf - -[Install asdf](https://asdf-vm.com/guide/getting-started.html), then run: - -```bash -asdf plugin add neovim -asdf install neovim stable -asdf set neovim stable --home -asdf reshim neovim -``` - -
- -
+neovim config diff --git a/doc/kickstart.txt b/doc/kickstart.txt deleted file mode 100644 index cb87ac3f1de..00000000000 --- a/doc/kickstart.txt +++ /dev/null @@ -1,24 +0,0 @@ -================================================================================ -INTRODUCTION *kickstart.nvim* - -Kickstart.nvim is a project to help you get started on your neovim journey. - - *kickstart-is-not* -It is not: -- Complete framework for every plugin under the sun -- Place to add every plugin that could ever be useful - - *kickstart-is* -It is: -- Somewhere that has a good start for the most common "IDE" type features: - - autocompletion - - goto-definition - - find references - - fuzzy finding - - and hinting at what more can be done :) -- A place to _kickstart_ your journey. - - You should fork this project and use/modify it so that it matches your - style and preferences. If you don't want to do that, there are probably - other projects that would fit much better for you (and that's great!)! - - vim:tw=78:ts=8:ft=help:norl: diff --git a/doc/tags b/doc/tags deleted file mode 100644 index 687ae7721d9..00000000000 --- a/doc/tags +++ /dev/null @@ -1,3 +0,0 @@ -kickstart-is kickstart.txt /*kickstart-is* -kickstart-is-not kickstart.txt /*kickstart-is-not* -kickstart.nvim kickstart.txt /*kickstart.nvim* diff --git a/init.lua b/init.lua index d5ae6dc9b2a..b917c563c54 100644 --- a/init.lua +++ b/init.lua @@ -1,105 +1,11 @@ ---[[ - -===================================================================== -==================== READ THIS BEFORE CONTINUING ==================== -===================================================================== -======== .-----. ======== -======== .----------------------. | === | ======== -======== |.-""""""""""""""""""-.| |-----| ======== -======== || || | === | ======== -======== || KICKSTART.NVIM || |-----| ======== -======== || || | === | ======== -======== || || |-----| ======== -======== ||:Tutor || |:::::| ======== -======== |'-..................-'| |____o| ======== -======== `"")----------------(""` ___________ ======== -======== /::::::::::| |::::::::::\ \ no mouse \ ======== -======== /:::========| |==hjkl==:::\ \ required \ ======== -======== '""""""""""""' '""""""""""""' '""""""""""' ======== -======== ======== -===================================================================== -===================================================================== - -What is Kickstart? - - Kickstart.nvim is *not* a distribution. - - Kickstart.nvim is a starting point for your own configuration. - The goal is that you can read every line of code, top-to-bottom, understand - what your configuration is doing, and modify it to suit your needs. - - Once you've done that, you can start exploring, configuring and tinkering to - make Neovim your own! That might mean leaving Kickstart just the way it is for a while - or immediately breaking it into modular pieces. It's up to you! - - If you don't know anything about Lua, I recommend taking some time to read through - a guide. One possible example which will only take 10-15 minutes: - - https://learnxinyminutes.com/docs/lua/ - - After understanding a bit more about Lua, you can use `:help lua-guide` as a - reference for how Neovim integrates Lua. - - :help lua-guide - - (or HTML version): https://neovim.io/doc/user/lua-guide.html - -Kickstart Guide: - - TODO: The very first thing you should do is to run the command `:Tutor` in Neovim. - - If you don't know what this means, type the following: - - - - : - - Tutor - - - - (If you already know the Neovim basics, you can skip this step.) - - Once you've completed that, you can continue working through **AND READING** the rest - of the kickstart init.lua. - - Next, run AND READ `:help`. - This will open up a help window with some basic information - about reading, navigating and searching the builtin help documentation. - - This should be the first place you go to look when you're stuck or confused - with something. It's one of my favorite Neovim features. - - MOST IMPORTANTLY, we provide a keymap "sh" to [s]earch the [h]elp documentation, - which is very useful when you're not exactly sure of what you're looking for. - - I have left several `:help X` comments throughout the init.lua - These are hints about where to find more information about the relevant settings, - plugins or Neovim features used in Kickstart. - - NOTE: Look for lines like this - - Throughout the file. These are for you, the reader, to help you understand what is happening. - Feel free to delete them once you know what you're doing, but they should serve as a guide - for when you are first encountering a few different constructs in your Neovim config. - -If you experience any errors while trying to install kickstart, run `:checkhealth` for more info. - -I hope you enjoy your Neovim journey, -- TJ - -P.S. You can delete this when you're done too. It's your config now! :) ---]] - --- Set as the leader key --- See `:help mapleader` --- NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used) vim.g.mapleader = ' ' vim.g.maplocalleader = ' ' +vim.g.have_nerd_font = true +vim.opt.number = true +vim.g.loaded_netrw = 1 +vim.g.loaded_netrwPlugin = 1 +vim.opt.swapfile = false --- Set to true if you have a Nerd Font installed and selected in the terminal -vim.g.have_nerd_font = false - --- [[ Setting options ]] --- See `:help vim.o` --- NOTE: You can change these options as you wish! --- For more options, you can see `:help option-list` - --- Make line numbers default -vim.o.number = true -- You can also add relative line numbers, to help with jumping. -- Experiment for yourself to see if you like it! -- vim.o.relativenumber = true @@ -107,6 +13,8 @@ vim.o.number = true -- Enable mouse mode, can be useful for resizing splits for example! vim.o.mouse = 'a' +vim.opt.wrap = false + -- Don't show the mode, since it's already in the status line vim.o.showmode = false @@ -142,13 +50,13 @@ vim.o.splitbelow = true -- Sets how neovim will display certain whitespace characters in the editor. -- See `:help 'list'` -- and `:help 'listchars'` --- --- Notice listchars is set using `vim.opt` instead of `vim.o`. --- It is very similar to `vim.o` but offers an interface for conveniently interacting with tables. --- See `:help lua-options` --- and `:help lua-guide-options` -vim.o.list = true -vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' } +vim.opt.list = false +vim.opt.listchars = { trail = '·', nbsp = '␣', tab = ' ' } + +vim.opt.tabstop = 2 -- Number of spaces that a in the file counts for +vim.opt.shiftwidth = 2 -- Number of spaces to use for each step of (auto)indent +vim.opt.expandtab = true -- Use spaces instead of actual tab characters +vim.opt.softtabstop = 2 -- Number of spaces to insert when pressing Tab -- Preview substitutions live, as you type! vim.o.inccommand = 'split' @@ -164,60 +72,6 @@ vim.o.scrolloff = 10 -- See `:help 'confirm'` vim.o.confirm = true --- [[ Basic Keymaps ]] --- See `:help vim.keymap.set()` - --- Clear highlights on search when pressing in normal mode --- See `:help hlsearch` -vim.keymap.set('n', '', 'nohlsearch') - --- Diagnostic Config & Keymaps --- See :help vim.diagnostic.Opts -vim.diagnostic.config { - update_in_insert = false, - severity_sort = true, - float = { border = 'rounded', source = 'if_many' }, - underline = { severity = vim.diagnostic.severity.ERROR }, - - -- Can switch between these as you prefer - virtual_text = true, -- Text shows up at the end of the line - virtual_lines = false, -- Teest shows up underneath the line, with virtual lines - - -- Auto open the float, so you can easily read the errors when jumping with `[d` and `]d` - jump = { float = true }, -} - -vim.keymap.set('n', 'q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' }) - --- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier --- for people to discover. Otherwise, you normally need to press , which --- is not what someone will guess without a bit more experience. --- --- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping --- or just use to exit terminal mode -vim.keymap.set('t', '', '', { desc = 'Exit terminal mode' }) - --- TIP: Disable arrow keys in normal mode --- vim.keymap.set('n', '', 'echo "Use h to move!!"') --- vim.keymap.set('n', '', 'echo "Use l to move!!"') --- vim.keymap.set('n', '', 'echo "Use k to move!!"') --- vim.keymap.set('n', '', 'echo "Use j to move!!"') - --- Keybinds to make split navigation easier. --- Use CTRL+ to switch between windows --- --- See `:help wincmd` for a list of all window commands -vim.keymap.set('n', '', '', { desc = 'Move focus to the left window' }) -vim.keymap.set('n', '', '', { desc = 'Move focus to the right window' }) -vim.keymap.set('n', '', '', { desc = 'Move focus to the lower window' }) -vim.keymap.set('n', '', '', { desc = 'Move focus to the upper window' }) - --- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes --- vim.keymap.set("n", "", "H", { desc = "Move window to the left" }) --- vim.keymap.set("n", "", "L", { desc = "Move window to the right" }) --- vim.keymap.set("n", "", "J", { desc = "Move window to the lower" }) --- vim.keymap.set("n", "", "K", { desc = "Move window to the upper" }) - -- [[ Basic Autocommands ]] -- See `:help lua-guide-autocommands` @@ -230,684 +84,15 @@ vim.api.nvim_create_autocmd('TextYankPost', { callback = function() vim.hl.on_yank() end, }) --- [[ Install `lazy.nvim` plugin manager ]] --- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info -local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' -if not (vim.uv or vim.loop).fs_stat(lazypath) then - local lazyrepo = 'https://github.com/folke/lazy.nvim.git' - local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } - if vim.v.shell_error ~= 0 then error('Error cloning lazy.nvim:\n' .. out) end -end - ----@type vim.Option -local rtp = vim.opt.rtp -rtp:prepend(lazypath) - --- [[ Configure and install plugins ]] --- --- To check the current status of your plugins, run --- :Lazy --- --- You can press `?` in this menu for help. Use `:q` to close the window --- --- To update plugins you can run --- :Lazy update --- --- NOTE: Here is where you install your plugins. -require('lazy').setup({ - -- NOTE: Plugins can be added via a link or github org/name. To run setup automatically, use `opts = {}` - { 'NMAC427/guess-indent.nvim', opts = {} }, - - -- Alternatively, use `config = function() ... end` for full control over the configuration. - -- If you prefer to call `setup` explicitly, use: - -- { - -- 'lewis6991/gitsigns.nvim', - -- config = function() - -- require('gitsigns').setup({ - -- -- Your gitsigns configuration here - -- }) - -- end, - -- } - -- - -- Here is a more advanced example where we pass configuration - -- options to `gitsigns.nvim`. - -- - -- See `:help gitsigns` to understand what the configuration keys do - { -- Adds git related signs to the gutter, as well as utilities for managing changes - 'lewis6991/gitsigns.nvim', - opts = { - signs = { - add = { text = '+' }, - change = { text = '~' }, - delete = { text = '_' }, - topdelete = { text = '‾' }, - changedelete = { text = '~' }, - }, - }, - }, - - -- NOTE: Plugins can also be configured to run Lua code when they are loaded. - -- - -- This is often very useful to both group configuration, as well as handle - -- lazy loading plugins that don't need to be loaded immediately at startup. - -- - -- For example, in the following configuration, we use: - -- event = 'VimEnter' - -- - -- which loads which-key before all the UI elements are loaded. Events can be - -- normal autocommands events (`:help autocmd-events`). - -- - -- Then, because we use the `opts` key (recommended), the configuration runs - -- after the plugin has been loaded as `require(MODULE).setup(opts)`. - - { -- Useful plugin to show you pending keybinds. - 'folke/which-key.nvim', - event = 'VimEnter', - opts = { - -- delay between pressing a key and opening which-key (milliseconds) - delay = 0, - icons = { mappings = vim.g.have_nerd_font }, - - -- Document existing key chains - spec = { - { 's', group = '[S]earch', mode = { 'n', 'v' } }, - { 't', group = '[T]oggle' }, - { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, - }, - }, - }, - - -- NOTE: Plugins can specify dependencies. - -- - -- The dependencies are proper plugin specifications as well - anything - -- you do for a plugin at the top level, you can do for a dependency. - -- - -- Use the `dependencies` key to specify the dependencies of a particular plugin - - { -- Fuzzy Finder (files, lsp, etc) - 'nvim-telescope/telescope.nvim', - -- By default, Telescope is included and acts as your picker for everything. - - -- If you would like to switch to a different picker (like snacks, or fzf-lua) - -- you can disable the Telescope plugin by setting enabled to false and enable - -- your replacement picker by requiring it explicitly (e.g. 'custom.plugins.snacks') - - -- Note: If you customize your config for yourself, - -- it’s best to remove the Telescope plugin config entirely - -- instead of just disabling it here, to keep your config clean. - enabled = true, - event = 'VimEnter', - dependencies = { - 'nvim-lua/plenary.nvim', - { -- If encountering errors, see telescope-fzf-native README for installation instructions - 'nvim-telescope/telescope-fzf-native.nvim', - - -- `build` is used to run some command when the plugin is installed/updated. - -- This is only run then, not every time Neovim starts up. - build = 'make', - - -- `cond` is a condition used to determine whether this plugin should be - -- installed and loaded. - cond = function() return vim.fn.executable 'make' == 1 end, - }, - { 'nvim-telescope/telescope-ui-select.nvim' }, - - -- Useful for getting pretty icons, but requires a Nerd Font. - { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, - }, - config = function() - -- Telescope is a fuzzy finder that comes with a lot of different things that - -- it can fuzzy find! It's more than just a "file finder", it can search - -- many different aspects of Neovim, your workspace, LSP, and more! - -- - -- The easiest way to use Telescope, is to start by doing something like: - -- :Telescope help_tags - -- - -- After running this command, a window will open up and you're able to - -- type in the prompt window. You'll see a list of `help_tags` options and - -- a corresponding preview of the help. - -- - -- Two important keymaps to use while in Telescope are: - -- - Insert mode: - -- - Normal mode: ? - -- - -- This opens a window that shows you all of the keymaps for the current - -- Telescope picker. This is really useful to discover what Telescope can - -- do as well as how to actually do it! - - -- [[ Configure Telescope ]] - -- See `:help telescope` and `:help telescope.setup()` - require('telescope').setup { - -- You can put your default mappings / updates / etc. in here - -- All the info you're looking for is in `:help telescope.setup()` - -- - -- defaults = { - -- mappings = { - -- i = { [''] = 'to_fuzzy_refine' }, - -- }, - -- }, - -- pickers = {} - extensions = { - ['ui-select'] = { require('telescope.themes').get_dropdown() }, - }, - } - - -- Enable Telescope extensions if they are installed - pcall(require('telescope').load_extension, 'fzf') - pcall(require('telescope').load_extension, 'ui-select') - - -- See `:help telescope.builtin` - local builtin = require 'telescope.builtin' - vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) - vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) - vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) - vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) - vim.keymap.set({ 'n', 'v' }, 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) - vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) - vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) - vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) - vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) - vim.keymap.set('n', 'sc', builtin.commands, { desc = '[S]earch [C]ommands' }) - vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) - - -- This runs on LSP attach per buffer (see main LSP attach function in 'neovim/nvim-lspconfig' config for more info, - -- it is better explained there). This allows easily switching between pickers if you prefer using something else! - vim.api.nvim_create_autocmd('LspAttach', { - group = vim.api.nvim_create_augroup('telescope-lsp-attach', { clear = true }), - callback = function(event) - local buf = event.buf - - -- Find references for the word under your cursor. - vim.keymap.set('n', 'grr', builtin.lsp_references, { buffer = buf, desc = '[G]oto [R]eferences' }) - - -- Jump to the implementation of the word under your cursor. - -- Useful when your language has ways of declaring types without an actual implementation. - vim.keymap.set('n', 'gri', builtin.lsp_implementations, { buffer = buf, desc = '[G]oto [I]mplementation' }) - - -- Jump to the definition of the word under your cursor. - -- This is where a variable was first declared, or where a function is defined, etc. - -- To jump back, press . - vim.keymap.set('n', 'grd', builtin.lsp_definitions, { buffer = buf, desc = '[G]oto [D]efinition' }) - - -- Fuzzy find all the symbols in your current document. - -- Symbols are things like variables, functions, types, etc. - vim.keymap.set('n', 'gO', builtin.lsp_document_symbols, { buffer = buf, desc = 'Open Document Symbols' }) - - -- Fuzzy find all the symbols in your current workspace. - -- Similar to document symbols, except searches over your entire project. - vim.keymap.set('n', 'gW', builtin.lsp_dynamic_workspace_symbols, { buffer = buf, desc = 'Open Workspace Symbols' }) - - -- Jump to the type of the word under your cursor. - -- Useful when you're not sure what type a variable is and you want to see - -- the definition of its *type*, not where it was *defined*. - vim.keymap.set('n', 'grt', builtin.lsp_type_definitions, { buffer = buf, desc = '[G]oto [T]ype Definition' }) - end, - }) - - -- Override default behavior and theme when searching - vim.keymap.set('n', '/', function() - -- You can pass additional configuration to Telescope to change the theme, layout, etc. - builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { - winblend = 10, - previewer = false, - }) - end, { desc = '[/] Fuzzily search in current buffer' }) - - -- It's also possible to pass additional configuration options. - -- See `:help telescope.builtin.live_grep()` for information about particular keys - vim.keymap.set( - 'n', - 's/', - function() - builtin.live_grep { - grep_open_files = true, - prompt_title = 'Live Grep in Open Files', - } - end, - { desc = '[S]earch [/] in Open Files' } - ) - - -- Shortcut for searching your Neovim configuration files - vim.keymap.set('n', 'sn', function() builtin.find_files { cwd = vim.fn.stdpath 'config' } end, { desc = '[S]earch [N]eovim files' }) - end, - }, - - -- LSP Plugins - { - -- Main LSP Configuration - 'neovim/nvim-lspconfig', - dependencies = { - -- Automatically install LSPs and related tools to stdpath for Neovim - -- Mason must be loaded before its dependents so we need to set it up here. - -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})` - { 'mason-org/mason.nvim', opts = {} }, - 'WhoIsSethDaniel/mason-tool-installer.nvim', - - -- Useful status updates for LSP. - { 'j-hui/fidget.nvim', opts = {} }, - - -- Allows extra capabilities provided by blink.cmp - 'saghen/blink.cmp', - }, - config = function() - -- Brief aside: **What is LSP?** - -- - -- LSP is an initialism you've probably heard, but might not understand what it is. - -- - -- LSP stands for Language Server Protocol. It's a protocol that helps editors - -- and language tooling communicate in a standardized fashion. - -- - -- In general, you have a "server" which is some tool built to understand a particular - -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers - -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone - -- processes that communicate with some "client" - in this case, Neovim! - -- - -- LSP provides Neovim with features like: - -- - Go to definition - -- - Find references - -- - Autocompletion - -- - Symbol Search - -- - and more! - -- - -- Thus, Language Servers are external tools that must be installed separately from - -- Neovim. This is where `mason` and related plugins come into play. - -- - -- If you're wondering about lsp vs treesitter, you can check out the wonderfully - -- and elegantly composed help section, `:help lsp-vs-treesitter` - - -- This function gets run when an LSP attaches to a particular buffer. - -- That is to say, every time a new file is opened that is associated with - -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this - -- function will be executed to configure the current buffer - vim.api.nvim_create_autocmd('LspAttach', { - group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }), - callback = function(event) - -- NOTE: Remember that Lua is a real programming language, and as such it is possible - -- to define small helper and utility functions so you don't have to repeat yourself. - -- - -- In this case, we create a function that lets us more easily define mappings specific - -- for LSP related items. It sets the mode, buffer and description for us each time. - local map = function(keys, func, desc, mode) - mode = mode or 'n' - vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc }) - end - - -- Rename the variable under your cursor. - -- Most Language Servers support renaming across files, etc. - map('grn', vim.lsp.buf.rename, '[R]e[n]ame') - - -- Execute a code action, usually your cursor needs to be on top of an error - -- or a suggestion from your LSP for this to activate. - map('gra', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' }) - - -- WARN: This is not Goto Definition, this is Goto Declaration. - -- For example, in C this would take you to the header. - map('grD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') - - -- The following two autocommands are used to highlight references of the - -- word under your cursor when your cursor rests there for a little while. - -- See `:help CursorHold` for information about when this is executed - -- - -- When you move your cursor, the highlights will be cleared (the second autocommand). - local client = vim.lsp.get_client_by_id(event.data.client_id) - if client and client:supports_method('textDocument/documentHighlight', event.buf) then - local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) - vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { - buffer = event.buf, - group = highlight_augroup, - callback = vim.lsp.buf.document_highlight, - }) - - vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, { - buffer = event.buf, - group = highlight_augroup, - callback = vim.lsp.buf.clear_references, - }) - - vim.api.nvim_create_autocmd('LspDetach', { - group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }), - callback = function(event2) - vim.lsp.buf.clear_references() - vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf } - end, - }) - end - - -- The following code creates a keymap to toggle inlay hints in your - -- code, if the language server you are using supports them - -- - -- This may be unwanted, since they displace some of your code - if client and client:supports_method('textDocument/inlayHint', event.buf) then - map('th', function() vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) end, '[T]oggle Inlay [H]ints') - end - end, - }) - - -- LSP servers and clients are able to communicate to each other what features they support. - -- By default, Neovim doesn't support everything that is in the LSP specification. - -- When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities. - -- So, we create new capabilities with blink.cmp, and then broadcast that to the servers. - local capabilities = require('blink.cmp').get_lsp_capabilities() - - -- Enable the following language servers - -- Feel free to add/remove any LSPs that you want here. They will automatically be installed. - -- See `:help lsp-config` for information about keys and how to configure - local servers = { - -- clangd = {}, - -- gopls = {}, - -- pyright = {}, - -- rust_analyzer = {}, - -- - -- Some languages (like typescript) have entire language plugins that can be useful: - -- https://github.com/pmizio/typescript-tools.nvim - -- - -- But for many setups, the LSP (`ts_ls`) will work just fine - -- ts_ls = {}, - } - - -- Ensure the servers and tools above are installed - -- - -- To check the current status of installed tools and/or manually install - -- other tools, you can run - -- :Mason - -- - -- You can press `g?` for help in this menu. - local ensure_installed = vim.tbl_keys(servers or {}) - vim.list_extend(ensure_installed, { - 'lua_ls', -- Lua Language server - 'stylua', -- Used to format Lua code - -- You can add other tools here that you want Mason to install - }) - - require('mason-tool-installer').setup { ensure_installed = ensure_installed } - - for name, server in pairs(servers) do - server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}) - vim.lsp.config(name, server) - vim.lsp.enable(name) - end - - -- Special Lua Config, as recommended by neovim help docs - vim.lsp.config('lua_ls', { - on_init = function(client) - if client.workspace_folders then - local path = client.workspace_folders[1].name - if path ~= vim.fn.stdpath 'config' and (vim.uv.fs_stat(path .. '/.luarc.json') or vim.uv.fs_stat(path .. '/.luarc.jsonc')) then return end - end - - client.config.settings.Lua = vim.tbl_deep_extend('force', client.config.settings.Lua, { - runtime = { - version = 'LuaJIT', - path = { 'lua/?.lua', 'lua/?/init.lua' }, - }, - workspace = { - checkThirdParty = false, - -- NOTE: this is a lot slower and will cause issues when working on your own configuration. - -- See https://github.com/neovim/nvim-lspconfig/issues/3189 - library = vim.api.nvim_get_runtime_file('', true), - }, - }) - end, - settings = { - Lua = {}, - }, - }) - vim.lsp.enable 'lua_ls' - end, - }, - - { -- Autoformat - 'stevearc/conform.nvim', - event = { 'BufWritePre' }, - cmd = { 'ConformInfo' }, - keys = { - { - 'f', - function() require('conform').format { async = true, lsp_format = 'fallback' } end, - mode = '', - desc = '[F]ormat buffer', - }, - }, - opts = { - notify_on_error = false, - format_on_save = function(bufnr) - -- Disable "format_on_save lsp_fallback" for languages that don't - -- have a well standardized coding style. You can add additional - -- languages here or re-enable it for the disabled ones. - local disable_filetypes = { c = true, cpp = true } - if disable_filetypes[vim.bo[bufnr].filetype] then - return nil - else - return { - timeout_ms = 500, - lsp_format = 'fallback', - } - end - end, - formatters_by_ft = { - lua = { 'stylua' }, - -- Conform can also run multiple formatters sequentially - -- python = { "isort", "black" }, - -- - -- You can use 'stop_after_first' to run the first available formatter from the list - -- javascript = { "prettierd", "prettier", stop_after_first = true }, - }, - }, - }, - - { -- Autocompletion - 'saghen/blink.cmp', - event = 'VimEnter', - version = '1.*', - dependencies = { - -- Snippet Engine - { - 'L3MON4D3/LuaSnip', - version = '2.*', - build = (function() - -- Build Step is needed for regex support in snippets. - -- This step is not supported in many windows environments. - -- Remove the below condition to re-enable on windows. - if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then return end - return 'make install_jsregexp' - end)(), - dependencies = { - -- `friendly-snippets` contains a variety of premade snippets. - -- See the README about individual language/framework/plugin snippets: - -- https://github.com/rafamadriz/friendly-snippets - -- { - -- 'rafamadriz/friendly-snippets', - -- config = function() - -- require('luasnip.loaders.from_vscode').lazy_load() - -- end, - -- }, - }, - opts = {}, - }, - }, - --- @module 'blink.cmp' - --- @type blink.cmp.Config - opts = { - keymap = { - -- 'default' (recommended) for mappings similar to built-in completions - -- to accept ([y]es) the completion. - -- This will auto-import if your LSP supports it. - -- This will expand snippets if the LSP sent a snippet. - -- 'super-tab' for tab to accept - -- 'enter' for enter to accept - -- 'none' for no mappings - -- - -- For an understanding of why the 'default' preset is recommended, - -- you will need to read `:help ins-completion` - -- - -- No, but seriously. Please read `:help ins-completion`, it is really good! - -- - -- All presets have the following mappings: - -- /: move to right/left of your snippet expansion - -- : Open menu or open docs if already open - -- / or /: Select next/previous item - -- : Hide menu - -- : Toggle signature help - -- - -- See :h blink-cmp-config-keymap for defining your own keymap - preset = 'default', - - -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: - -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps - }, - - appearance = { - -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font' - -- Adjusts spacing to ensure icons are aligned - nerd_font_variant = 'mono', - }, - - completion = { - -- By default, you may press `` to show the documentation. - -- Optionally, set `auto_show = true` to show the documentation after a delay. - documentation = { auto_show = false, auto_show_delay_ms = 500 }, - }, - - sources = { - default = { 'lsp', 'path', 'snippets' }, - }, - - snippets = { preset = 'luasnip' }, - - -- Blink.cmp includes an optional, recommended rust fuzzy matcher, - -- which automatically downloads a prebuilt binary when enabled. - -- - -- By default, we use the Lua implementation instead, but you may enable - -- the rust implementation via `'prefer_rust_with_warning'` - -- - -- See :h blink-cmp-config-fuzzy for more information - fuzzy = { implementation = 'lua' }, - - -- Shows a signature help window while you type arguments for a function - signature = { enabled = true }, - }, - }, - - { -- You can easily change to a different colorscheme. - -- Change the name of the colorscheme plugin below, and then - -- change the command in the config to whatever the name of that colorscheme is. - -- - -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. - 'folke/tokyonight.nvim', - priority = 1000, -- Make sure to load this before all the other start plugins. - config = function() - ---@diagnostic disable-next-line: missing-fields - require('tokyonight').setup { - styles = { - comments = { italic = false }, -- Disable italics in comments - }, - } - - -- Load the colorscheme here. - -- Like many other themes, this one has different styles, and you could load - -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. - vim.cmd.colorscheme 'tokyonight-night' - end, - }, - - -- Highlight todo, notes, etc in comments - { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } }, - - { -- Collection of various small independent plugins/modules - 'nvim-mini/mini.nvim', - config = function() - -- Better Around/Inside textobjects - -- - -- Examples: - -- - va) - [V]isually select [A]round [)]paren - -- - yinq - [Y]ank [I]nside [N]ext [Q]uote - -- - ci' - [C]hange [I]nside [']quote - require('mini.ai').setup { n_lines = 500 } - - -- Add/delete/replace surroundings (brackets, quotes, etc.) - -- - -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren - -- - sd' - [S]urround [D]elete [']quotes - -- - sr)' - [S]urround [R]eplace [)] ['] - require('mini.surround').setup() - - -- Simple and easy statusline. - -- You could remove this setup call if you don't like it, - -- and try some other statusline plugin - local statusline = require 'mini.statusline' - -- set use_icons to true if you have a Nerd Font - statusline.setup { use_icons = vim.g.have_nerd_font } - - -- You can configure sections in the statusline by overriding their - -- default behavior. For example, here we set the section for - -- cursor location to LINE:COLUMN - ---@diagnostic disable-next-line: duplicate-set-field - statusline.section_location = function() return '%2l:%-2v' end - - -- ... and there is more! - -- Check out: https://github.com/nvim-mini/mini.nvim - end, - }, - - { -- Highlight, edit, and navigate code - 'nvim-treesitter/nvim-treesitter', - config = function() - local filetypes = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' } - require('nvim-treesitter').install(filetypes) - vim.api.nvim_create_autocmd('FileType', { - pattern = filetypes, - callback = function() vim.treesitter.start() end, - }) - end, - }, - - -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the - -- init.lua. If you want these files, they are in the repository, so you can just download them and - -- place them in the correct locations. - - -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart - -- - -- Here are some example plugins that I've included in the Kickstart repository. - -- Uncomment any of the lines below to enable them (you will need to restart nvim). - -- - -- require 'kickstart.plugins.debug', - -- require 'kickstart.plugins.indent_line', - -- require 'kickstart.plugins.lint', - -- require 'kickstart.plugins.autopairs', - -- require 'kickstart.plugins.neo-tree', - -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps - - -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua` - -- This is the easiest way to modularize your config. - -- - -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going. - -- { import = 'custom.plugins' }, - -- - -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec` - -- Or use telescope! - -- In normal mode type `sh` then write `lazy.nvim-plugin` - -- you can continue same window with `sr` which resumes last telescope search -}, { - ui = { - -- If you are using a Nerd Font: set icons to an empty table which will use the - -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table - icons = vim.g.have_nerd_font and {} or { - cmd = '⌘', - config = '🛠', - event = '📅', - ft = '📂', - init = '⚙', - keys = '🗝', - plugin = '🔌', - runtime = '💻', - require = '🌙', - source = '📄', - start = '🚀', - task = '📌', - lazy = '💤 ', - }, - }, +vim.api.nvim_create_autocmd('FileType', { + pattern = 'neo-tree', + callback = function() + vim.wo.winfixwidth = true + end, }) +require 'config.keymap' +require 'config.lazy' + -- The line beneath this is called `modeline`. See `:help modeline` -- vim: ts=2 sts=2 sw=2 et diff --git a/lua/config/keymap.lua b/lua/config/keymap.lua new file mode 100644 index 00000000000..0eb5c9221f2 --- /dev/null +++ b/lua/config/keymap.lua @@ -0,0 +1,75 @@ +-- [[ Basic Keymaps ]] +-- See `:help vim.keymap.set()` + +-- Clear highlights on search when pressing in normal mode +-- See `:help hlsearch` +vim.keymap.set('n', '', 'nohlsearch') + +vim.keymap.set('n', 'e', function() + require('neo-tree.command').execute { toggle = true, dir = vim.uv.cwd() } +end) + +-- Diagnostic keymaps +vim.keymap.set('n', 'q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' }) + +vim.keymap.set('n', ']e', function() + vim.diagnostic.jump { forward = true, float = true, count = 1, severity = 'ERROR' } +end, { desc = 'Go to next diagnostic' }) +vim.keymap.set('n', '[e', function() + vim.diagnostic.jump { forward = false, float = true, count = 1, severity = 'ERROR' } +end, { desc = 'Go to previous diagnostic' }) + +vim.keymap.set('n', ']w', function() + vim.diagnostic.jump { forward = true, float = true, count = 1, severity = 'WARN' } +end, { desc = 'Go to next diagnostic' }) +vim.keymap.set('n', '[w', function() + vim.diagnostic.jump { forward = false, float = true, count = 1, severity = 'WARN' } +end, { desc = 'Go to previous diagnostic' }) +vim.keymap.set('n', 'cd', vim.diagnostic.open_float, { desc = 'Line Diagnostics' }) + +-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier +-- for people to discover. Otherwise, you normally need to press , which +-- is not what someone will guess without a bit more experience. +-- +-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping +-- or just use to exit terminal mode +vim.keymap.set('t', '', '', { desc = 'Exit terminal mode' }) + +-- TIP: Disable arrow keys in normal mode +-- vim.keymap.set('n', '', 'echo "Use h to move!!"') +-- vim.keymap.set('n', '', 'echo "Use l to move!!"') +-- vim.keymap.set('n', '', 'echo "Use k to move!!"') +-- vim.keymap.set('n', '', 'echo "Use j to move!!"') + +-- Keybinds to make split navigation easier. +-- Use CTRL+ to switch between windows +-- +-- See `:help wincmd` for a list of all window commands +vim.keymap.set('n', '', '', { desc = 'Move focus to the left window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the right window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the lower window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the upper window' }) + +-- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes +-- vim.keymap.set("n", "", "H", { desc = "Move window to the left" }) +-- vim.keymap.set("n", "", "L", { desc = "Move window to the right" }) +-- vim.keymap.set("n", "", "J", { desc = "Move window to the lower" }) +-- vim.keymap.set("n", "", "K", { desc = "Move window to the upper" }) + +-- [[ Basic Autocommands ]] +-- See `:help lua-guide-autocommands` + +-- buffers + +local function close_other_buffers() + local current = vim.api.nvim_get_current_buf() + local bufs = vim.api.nvim_list_bufs() + + for _, buf in ipairs(bufs) do + if vim.api.nvim_buf_is_loaded(buf) and buf ~= current then + vim.api.nvim_buf_delete(buf, { force = true }) + end + end +end +vim.keymap.set('n', 'bd', ':bd', { desc = 'Close current buffer' }) +vim.keymap.set('n', 'bo', close_other_buffers, { desc = 'Close all buffers except current' }) diff --git a/lua/config/lazy.lua b/lua/config/lazy.lua new file mode 100644 index 00000000000..ec4f075706a --- /dev/null +++ b/lua/config/lazy.lua @@ -0,0 +1,13 @@ +local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' +if not (vim.uv or vim.loop).fs_stat(lazypath) then + local lazyrepo = 'https://github.com/folke/lazy.nvim.git' + local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } + if vim.v.shell_error ~= 0 then + error('Error cloning lazy.nvim:\n' .. out) + end +end ---@diagnostic disable-next-line: undefined-field +vim.opt.rtp:prepend(lazypath) + +require('lazy').setup { + { import = 'plugins' }, +} diff --git a/lua/custom/plugins/init.lua b/lua/custom/plugins/init.lua deleted file mode 100644 index be0eb9d8d7a..00000000000 --- a/lua/custom/plugins/init.lua +++ /dev/null @@ -1,5 +0,0 @@ --- You can add your own plugins here or in other files in this directory! --- I promise not to create any merge conflicts in this directory :) --- --- See the kickstart.nvim README for more information -return {} diff --git a/lua/kickstart/health.lua b/lua/health.lua similarity index 100% rename from lua/kickstart/health.lua rename to lua/health.lua diff --git a/lua/kickstart/plugins/autopairs.lua b/lua/plugins/autopairs.lua similarity index 100% rename from lua/kickstart/plugins/autopairs.lua rename to lua/plugins/autopairs.lua diff --git a/lua/plugins/blink.lua b/lua/plugins/blink.lua new file mode 100644 index 00000000000..b866ef2802b --- /dev/null +++ b/lua/plugins/blink.lua @@ -0,0 +1,101 @@ +return { -- Autocompletion + 'saghen/blink.cmp', + event = 'VimEnter', + version = '1.*', + dependencies = { + -- Snippet Engine + { + 'L3MON4D3/LuaSnip', + version = '2.*', + build = (function() + -- Build Step is needed for regex support in snippets. + -- This step is not supported in many windows environments. + -- Remove the below condition to re-enable on windows. + if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then + return + end + return 'make install_jsregexp' + end)(), + dependencies = { + -- `friendly-snippets` contains a variety of premade snippets. + -- See the README about individual language/framework/plugin snippets: + -- https://github.com/rafamadriz/friendly-snippets + -- { + -- 'rafamadriz/friendly-snippets', + -- config = function() + -- require('luasnip.loaders.from_vscode').lazy_load() + -- end, + -- }, + }, + opts = {}, + }, + 'folke/lazydev.nvim', + }, + --- @module 'blink.cmp' + --- @type blink.cmp.Config + opts = { + keymap = { + -- 'default' (recommended) for mappings similar to built-in completions + -- to accept ([y]es) the completion. + -- This will auto-import if your LSP supports it. + -- This will expand snippets if the LSP sent a snippet. + -- 'super-tab' for tab to accept + -- 'enter' for enter to accept + -- 'none' for no mappings + -- + -- For an understanding of why the 'default' preset is recommended, + -- you will need to read `:help ins-completion` + -- + -- No, but seriously. Please read `:help ins-completion`, it is really good! + -- + -- All presets have the following mappings: + -- /: move to right/left of your snippet expansion + -- : Open menu or open docs if already open + -- / or /: Select next/previous item + -- : Hide menu + -- : Toggle signature help + -- + -- See :h blink-cmp-config-keymap for defining your own keymap + preset = 'default', + [''] = { 'select_prev', 'fallback' }, + [''] = { 'select_next', 'fallback' }, + [''] = { 'accept', 'fallback' }, + + -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: + -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps + }, + + appearance = { + -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font' + -- Adjusts spacing to ensure icons are aligned + nerd_font_variant = 'mono', + }, + + completion = { + -- By default, you may press `` to show the documentation. + -- Optionally, set `auto_show = true` to show the documentation after a delay. + documentation = { auto_show = false, auto_show_delay_ms = 500 }, + }, + + sources = { + default = { 'lsp', 'path', 'snippets', 'lazydev' }, + providers = { + lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 }, + }, + }, + + snippets = { preset = 'luasnip' }, + + -- Blink.cmp includes an optional, recommended rust fuzzy matcher, + -- which automatically downloads a prebuilt binary when enabled. + -- + -- By default, we use the Lua implementation instead, but you may enable + -- the rust implementation via `'prefer_rust_with_warning'` + -- + -- See :h blink-cmp-config-fuzzy for more information + fuzzy = { implementation = 'lua' }, + + -- Shows a signature help window while you type arguments for a function + signature = { enabled = true }, + }, +} diff --git a/lua/plugins/conform.lua b/lua/plugins/conform.lua new file mode 100644 index 00000000000..60aedf6a12e --- /dev/null +++ b/lua/plugins/conform.lua @@ -0,0 +1,57 @@ +return { -- Autoformat + 'stevearc/conform.nvim', + event = { 'BufWritePre' }, + cmd = { 'ConformInfo' }, + keys = { + { + 'ff', + function() + require('conform').format { async = true, lsp_format = 'first' } + end, + mode = { 'n', 'v' }, + desc = '[F]ormat buffer', + }, + }, + opts = { + notify_on_error = true, + format_on_save = function(bufnr) + -- Disable "format_on_save lsp_fallback" for languages that don't + -- have a well standardized coding style. You can add additional + -- languages here or re-enable it for the disabled ones. + local disable_filetypes = { c = true, cpp = true } + if disable_filetypes[vim.bo[bufnr].filetype] then + return nil + else + return { + timeout_ms = 500, + lsp_format = 'first', + } + end + end, + formatters = { + ['zig-fmt'] = { + command = 'zig', + args = { 'fmt', '--stdin' }, + stdin = true, + }, + biome = { + --require_cwd = true, + }, + }, + formatters_by_ft = { + lua = { 'stylua' }, + typescriptreact = { 'biome-check' }, + javascriptreact = { 'biome-check' }, + typescript = { 'biome-check' }, + javascript = { 'biome-check' }, + json = { 'biome-check' }, + go = { 'gofmt' }, + sql = { 'sqlfmt' }, + zig = { 'zig-fmt' }, + fish = { 'fish_indent' }, + yaml = { 'yamlfmt' }, + yml = { 'yamlfmt' }, + nix = { 'nixfmt' }, + }, + }, +} diff --git a/lua/plugins/gitlab.lua b/lua/plugins/gitlab.lua new file mode 100644 index 00000000000..5efd66949c9 --- /dev/null +++ b/lua/plugins/gitlab.lua @@ -0,0 +1,19 @@ +return { + 'https://gitlab.com/gitlab-org/editor-extensions/gitlab.vim.git', + -- Activate when a file is created/opened + event = { 'BufReadPre', 'BufNewFile' }, + -- Activate when a supported filetype is open + ft = { 'go', 'javascript', 'python', 'ruby' }, + cond = function() + -- Only activate if token is present in environment variable. + -- Remove this line to use the interactive workflow. + return vim.env.GITLAB_TOKEN ~= nil and vim.env.GITLAB_TOKEN ~= '' + end, + opts = { + statusline = { + -- Hook into the built-in statusline to indicate the status + -- of the GitLab Duo Code Suggestions integration + enabled = true, + }, + }, +} diff --git a/lua/kickstart/plugins/indent_line.lua b/lua/plugins/indent_line.lua similarity index 91% rename from lua/kickstart/plugins/indent_line.lua rename to lua/plugins/indent_line.lua index ed7f269399f..d60dca41a7e 100644 --- a/lua/kickstart/plugins/indent_line.lua +++ b/lua/plugins/indent_line.lua @@ -4,6 +4,7 @@ return { -- Enable `lukas-reineke/indent-blankline.nvim` -- See `:help ibl` main = 'ibl', + enabled = false, opts = {}, }, } diff --git a/lua/plugins/lazydev.lua b/lua/plugins/lazydev.lua new file mode 100644 index 00000000000..834bc59f885 --- /dev/null +++ b/lua/plugins/lazydev.lua @@ -0,0 +1,10 @@ +return { + 'folke/lazydev.nvim', + ft = 'lua', + opts = { + library = { + -- Load luvit types when the `vim.uv` word is found + { path = '${3rd}/luv/library', words = { 'vim%.uv' } }, + }, + }, +} diff --git a/lua/plugins/lazygit.lua b/lua/plugins/lazygit.lua new file mode 100644 index 00000000000..dc1a44a29f1 --- /dev/null +++ b/lua/plugins/lazygit.lua @@ -0,0 +1,20 @@ +return { + 'kdheepak/lazygit.nvim', + lazy = true, + cmd = { + 'LazyGit', + 'LazyGitConfig', + 'LazyGitCurrentFile', + 'LazyGitFilter', + 'LazyGitFilterCurrentFile', + }, + -- optional for floating window border decoration + dependencies = { + 'nvim-lua/plenary.nvim', + }, + -- setting the keybinding for LazyGit with 'keys' is recommended in + -- order to load the plugin when the command is run for the first time + keys = { + { 'gg', 'LazyGit', desc = 'LazyGit' }, + }, +} diff --git a/lua/plugins/lspconfig.lua b/lua/plugins/lspconfig.lua new file mode 100644 index 00000000000..b6a5251d1fc --- /dev/null +++ b/lua/plugins/lspconfig.lua @@ -0,0 +1,152 @@ +return { -- Main LSP Configuration + 'neovim/nvim-lspconfig', + dependencies = { + { 'williamboman/mason.nvim', opts = {} }, + 'williamboman/mason-lspconfig.nvim', + 'WhoIsSethDaniel/mason-tool-installer.nvim', + { 'j-hui/fidget.nvim', opts = {} }, + 'saghen/blink.cmp', + }, + config = function() + vim.api.nvim_create_autocmd('LspAttach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }), + callback = function(event) + local map = function(keys, func, desc, mode) + mode = mode or 'n' + vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc }) + end + map('cr', vim.lsp.buf.rename, '[R]e[n]ame') + map('ca', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' }) + map('grr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences') + map('gri', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation') + map('grd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition') + map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition') + -- map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') + map('gD', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation') + map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols') + map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols') + map('grt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition') + + ---@param client vim.lsp.Client + ---@param method vim.lsp.protocol.Method + ---@param bufnr? integer some lsp support methods only in specific files + ---@return boolean + local function client_supports_method(client, method, bufnr) + if vim.fn.has 'nvim-0.11' == 1 then + return client:supports_method(method, bufnr) + else + return client.supports_method(method, { bufnr = bufnr }) + end + end + + local client = vim.lsp.get_client_by_id(event.data.client_id) + if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then + local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) + vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { + buffer = event.buf, + group = highlight_augroup, + callback = vim.lsp.buf.document_highlight, + }) + + vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, { + buffer = event.buf, + group = highlight_augroup, + callback = vim.lsp.buf.clear_references, + }) + vim.api.nvim_create_autocmd('LspDetach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }), + callback = function(event2) + vim.lsp.buf.clear_references() + vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf } + end, + }) + end + + if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then + map('th', function() + vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) + end, '[T]oggle Inlay [H]ints') + end + end, + }) + + vim.diagnostic.config { + severity_sort = true, + float = { border = 'rounded', source = 'if_many' }, + underline = { severity = vim.diagnostic.severity.ERROR }, + signs = vim.g.have_nerd_font and { + text = { + [vim.diagnostic.severity.ERROR] = '󰅚 ', + [vim.diagnostic.severity.WARN] = '󰀪 ', + [vim.diagnostic.severity.INFO] = '󰋽 ', + [vim.diagnostic.severity.HINT] = '󰌶 ', + }, + } or {}, + virtual_text = { + source = 'if_many', + spacing = 2, + format = function(diagnostic) + local diagnostic_message = { + [vim.diagnostic.severity.ERROR] = diagnostic.message, + [vim.diagnostic.severity.WARN] = diagnostic.message, + [vim.diagnostic.severity.INFO] = diagnostic.message, + [vim.diagnostic.severity.HINT] = diagnostic.message, + } + return diagnostic_message[diagnostic.severity] + end, + }, + } + + local capabilities = require('blink.cmp').get_lsp_capabilities() + local lspconfig = require 'lspconfig' + + lspconfig.sourcekit.setup { + capabilities = { + workspace = { + didChangeWatchedFiles = { + dynamicRegistration = true, + }, + }, + }, + } + + lspconfig.omnisharp.setup { + capabilities = capabilities, + enable_roslyn_analysers = true, + enable_import_completion = true, + organize_imports_on_format = true, + enable_decompilation_support = true, + filetypes = { 'cs', 'vb', 'csproj', 'sln', 'slnx', 'props', 'csx', 'targets', 'tproj', 'slngen', 'fproj' }, + } + + local servers = { + lua_ls = { + settings = { + Lua = { + completion = { + callSnippet = 'Replace', + }, + }, + }, + }, + } + + local ensure_installed = vim.tbl_keys(servers or {}) + vim.list_extend(ensure_installed, { + 'stylua', -- Used to format Lua code + }) + require('mason-tool-installer').setup { ensure_installed = ensure_installed } + + require('mason-lspconfig').setup { + ensure_installed = {}, + automatic_installation = false, + handlers = { + function(server_name) + local server = servers[server_name] or {} + server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}) + require('lspconfig')[server_name].setup(server) + end, + }, + } + end, +} diff --git a/lua/plugins/neo-tree.lua b/lua/plugins/neo-tree.lua new file mode 100644 index 00000000000..6a971a633f3 --- /dev/null +++ b/lua/plugins/neo-tree.lua @@ -0,0 +1,44 @@ +-- Neo-tree is a Neovim plugin to browse the file system +-- https://github.com/nvim-neo-tree/neo-tree.nvim + +return { + 'nvim-neo-tree/neo-tree.nvim', + version = '*', + dependencies = { + 'nvim-lua/plenary.nvim', + 'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended + 'MunifTanjim/nui.nvim', + }, + cmd = 'Neotree', + keys = { + { + 'fe', + function() + require('neo-tree.command').execute { toggle = true, dir = vim.uv.cwd() } + end, + desc = 'Explorer NeoTree (Root Dir)', + }, + { + 'fE', + function() + require('neo-tree.command').execute { toggle = true, dir = vim.uv.cwd() } + end, + desc = 'Explorer NeoTree (cwd)', + }, + { 'e', 'fe', desc = 'Explorer NeoTree (Root Dir)', remap = true }, + { 'E', 'fE', desc = 'Explorer NeoTree (cwd)', remap = true }, + }, + opts = { + filesystem = { + follow_current_file = { enabled = true }, + window = { + -- position = 'float', + mappings = { + ['l'] = 'open', + ['h'] = 'close_node', + [''] = 'none', + }, + }, + }, + }, +} diff --git a/lua/plugins/supermaven.lua b/lua/plugins/supermaven.lua new file mode 100644 index 00000000000..75d8fedb60a --- /dev/null +++ b/lua/plugins/supermaven.lua @@ -0,0 +1,6 @@ +return { + 'supermaven-inc/supermaven-nvim', + config = function() + require('supermaven-nvim').setup {} + end, +} diff --git a/lua/plugins/telescope.lua b/lua/plugins/telescope.lua new file mode 100644 index 00000000000..522b555829c --- /dev/null +++ b/lua/plugins/telescope.lua @@ -0,0 +1,103 @@ +return { -- Fuzzy Finder (files, lsp, etc) + 'nvim-telescope/telescope.nvim', + event = 'VimEnter', + dependencies = { + 'nvim-lua/plenary.nvim', + { -- If encountering errors, see telescope-fzf-native README for installation instructions + 'nvim-telescope/telescope-fzf-native.nvim', + + -- `build` is used to run some command when the plugin is installed/updated. + -- This is only run then, not every time Neovim starts up. + build = 'make', + + -- `cond` is a condition used to determine whether this plugin should be + -- installed and loaded. + cond = function() + return vim.fn.executable 'make' == 1 + end, + }, + { 'nvim-telescope/telescope-ui-select.nvim' }, + + -- Useful for getting pretty icons, but requires a Nerd Font. + { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, + }, + config = function() + -- Telescope is a fuzzy finder that comes with a lot of different things that + -- it can fuzzy find! It's more than just a "file finder", it can search + -- many different aspects of Neovim, your workspace, LSP, and more! + -- + -- The easiest way to use Telescope, is to start by doing something like: + -- :Telescope help_tags + -- + -- After running this command, a window will open up and you're able to + -- type in the prompt window. You'll see a list of `help_tags` options and + -- a corresponding preview of the help. + -- + -- Two important keymaps to use while in Telescope are: + -- - Insert mode: + -- - Normal mode: ? + -- + -- This opens a window that shows you all of the keymaps for the current + -- Telescope picker. This is really useful to discover what Telescope can + -- do as well as how to actually do it! + + -- [[ Configure Telescope ]] + -- See `:help telescope` and `:help telescope.setup()` + require('telescope').setup { + -- You can put your default mappings / updates / etc. in here + -- All the info you're looking for is in `:help telescope.setup()` + -- + -- defaults = { + -- mappings = { + -- i = { [''] = 'to_fuzzy_refine' }, + -- }, + -- }, + -- pickers = {} + extensions = { + ['ui-select'] = { + require('telescope.themes').get_dropdown(), + }, + }, + } + + -- Enable Telescope extensions if they are installed + pcall(require('telescope').load_extension, 'fzf') + pcall(require('telescope').load_extension, 'ui-select') + + -- See `:help telescope.builtin` + local builtin = require 'telescope.builtin' + vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) + vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) + vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) + vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) + vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) + vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) + vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) + vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) + vim.keymap.set('n', '', builtin.find_files, { desc = '[S]earch [F]iles' }) + vim.keymap.set('n', 'sb', builtin.buffers, { desc = '[ ] Find existing buffers' }) + + -- Slightly advanced example of overriding default behavior and theme + vim.keymap.set('n', '/', function() + -- You can pass additional configuration to Telescope to change the theme, layout, etc. + builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { + winblend = 10, + previewer = false, + }) + end, { desc = '[/] Fuzzily search in current buffer' }) + + -- It's also possible to pass additional configuration options. + -- See `:help telescope.builtin.live_grep()` for information about particular keys + vim.keymap.set('n', 's/', function() + builtin.live_grep { + grep_open_files = true, + prompt_title = 'Live Grep in Open Files', + } + end, { desc = '[S]earch [/] in Open Files' }) + + -- Shortcut for searching your Neovim configuration files + vim.keymap.set('n', 'sn', function() + builtin.find_files { cwd = vim.fn.stdpath 'config' } + end, { desc = '[S]earch [N]eovim files' }) + end, +} diff --git a/lua/plugins/theme.lua b/lua/plugins/theme.lua new file mode 100644 index 00000000000..06f4aac436d --- /dev/null +++ b/lua/plugins/theme.lua @@ -0,0 +1,23 @@ +return { -- You can easily change to a different colorscheme. + -- Change the name of the colorscheme plugin below, and then + -- change the command in the config to whatever the name of that colorscheme is. + -- + -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. + 'folke/tokyonight.nvim', + priority = 1000, -- Make sure to load this before all the other start plugins. + config = function() + ---@diagnostic disable-next-line: missing-fields + require('tokyonight').setup { + styles = { + comments = { italic = false }, -- Disable italics in comments + sidebars = 'transparent', + floats = 'transparent', + }, + } + + -- Load the colorscheme here. + -- Like many other themes, this one has different styles, and you could load + -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. + vim.cmd.colorscheme 'tokyonight-night' + end, +} diff --git a/lua/plugins/treesitter.lua b/lua/plugins/treesitter.lua new file mode 100644 index 00000000000..bea35d3aac2 --- /dev/null +++ b/lua/plugins/treesitter.lua @@ -0,0 +1,25 @@ +return { -- Highlight, edit, and navigate code + 'nvim-treesitter/nvim-treesitter', + build = ':TSUpdate', + main = 'nvim-treesitter.configs', -- Sets main module to use for opts + -- [[ Configure Treesitter ]] See `:help nvim-treesitter` + opts = { + ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' }, + -- Autoinstall languages that are not installed + auto_install = true, + highlight = { + enable = true, + -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules. + -- If you are experiencing weird indenting issues, add the language to + -- the list of additional_vim_regex_highlighting and disabled languages for indent. + additional_vim_regex_highlighting = { 'ruby' }, + }, + indent = { enable = true, disable = { 'ruby' } }, + }, + -- There are additional nvim-treesitter modules that you can use to interact + -- with nvim-treesitter. You should go explore a few and see what interests you: + -- + -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` + -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context + -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects +} diff --git a/lua/plugins/which-key.lua b/lua/plugins/which-key.lua new file mode 100644 index 00000000000..6110c055d52 --- /dev/null +++ b/lua/plugins/which-key.lua @@ -0,0 +1,64 @@ +-- NOTE: Plugins can also be configured to run Lua code when they are loaded. +-- +-- This is often very useful to both group configuration, as well as handle +-- lazy loading plugins that don't need to be loaded immediately at startup. +-- +-- For example, in the following configuration, we use: +-- event = 'VimEnter' which loads which-key before all the UI elements are loaded. Events can be +-- normal autocommands events (`:help autocmd-events`). +-- +-- Then, because we use the `opts` key (recommended), the configuration runs +-- after the plugin has been loaded as `require(MODULE).setup(opts)`. + +return { -- Useful plugin to show you pending keybinds. + 'folke/which-key.nvim', + event = 'VimEnter', -- Sets the loading event to 'VimEnter' + opts = { + -- delay between pressing a key and opening which-key (milliseconds) + -- this setting is independent of vim.opt.timeoutlen + delay = 250, + icons = { + -- set icon mappings to true if you have a Nerd Font + mappings = vim.g.have_nerd_font, + -- If you are using a Nerd Font: set icons.keys to an empty table which will use the + -- default which-key.nvim defined Nerd Font icons, otherwise define a string table + keys = vim.g.have_nerd_font and {} or { + Up = ' ', + Down = ' ', + Left = ' ', + Right = ' ', + C = ' ', + M = ' ', + D = ' ', + S = ' ', + CR = ' ', + Esc = ' ', + ScrollWheelDown = ' ', + ScrollWheelUp = ' ', + NL = ' ', + BS = ' ', + Space = ' ', + Tab = ' ', + F1 = '', + F2 = '', + F3 = '', + F4 = '', + F5 = '', + F6 = '', + F7 = '', + F8 = '', + F9 = '', + F10 = '', + F11 = '', + F12 = '', + }, + }, + + -- Document existing key chains + spec = { + { 's', group = '[S]earch' }, + { 't', group = '[T]oggle' }, + { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, + }, + }, +}