'Adsb Warning Message' does not show in OSD yet 'Adsb Info'

[Kacmarik]

Steps to Reproduce

1. MSP Display port configured on UART3 115200
2. Add both 'Adsb Warning Message' and 'Adsb Info' to OSD (lots of other stuff too and all work but tried with default FW same result)
3. DJIWTF Video format
4. using ADSBee 1090 fed into UART
5. DJI goggles V1 with Air Unit
   Everything works perfect even 'Adsb Info' but not 'Adsb Warning Message' does not even show as an element.
   

• FC Board name and vendor: SpeedyBee F405 v1
• INAV version string:

version

INAV/MATEKF765 8.0.1 Mar 28 2025 / 09:54:31 (ae47bcb)

GCC-13.2.1 20231009

[error414]

Adsb Warning Message is hidden by default, is displayed only if aicraft reaches the limits:

osd_adsb_distance_warning
osd_adsb_distance_alert
osd_adsb_ignore_plane_above_me_limit

Did you set correctly these values?

[Kacmarik]

Thank you for the response. I have them set but at lower values. Leaving the 'ignore' at 0 I had the other two set at low values and now changed them to their highest setting so I may evaluate them.

…

On Sun, Dec 7, 2025 at 10:43 AM error414 ***@***.***> wrote: *error414* left a comment (iNavFlight/inav#11156) <#11156 (comment)> Adsb Warning Message is hidden by default, is displayed only if aicraft reaches the limits: osd_adsb_distance_warning osd_adsb_distance_alert osd_adsb_ignore_plane_above_me_limit Did you set correctly these values? — Reply to this email directly, view it on GitHub <#11156 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARVNZAL5YU4PPPVA5PLWHJL4ARDK3AVCNFSM6AAAAACN27N2RCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTMMRSGMZTONBUGU> . You are receiving this because you authored the thread.Message ID: ***@***.***>