Documentation update lmp-partner-arduino-image to lmp-factory-image

Author: TaddyHC

content/hardware/04.pro/boards/portenta-x8/tutorials/08.image-building/assets/portenta-x8_build.sh

@@ -23,7 +23,7 @@ repo init -u https://github.com/arduino/lmp-manifest.git -m arduino.xml -b relea
 echo Pulling git-repo files
 repo sync
 
-# Build 'lmp-partner-arduino-image' image
+# Build 'lmp-factory-image' image. lmp-partner-arduino-image is now known as lmp-factory-image
 echo Building Portenta-X8 image
 DISTRO=lmp-xwayland MACHINE=portenta-x8 . setup-environment
 echo "ACCEPT_FSL_EULA = \"1\"" >> conf/local.conf
@@ -36,7 +36,7 @@ cd ..
 echo Building tools
 DISTRO=lmp-mfgtool MACHINE=portenta-x8 . setup-environment
 echo "ACCEPT_FSL_EULA = \"1\"" >> conf/local.conf
-echo "MFGTOOL_FLASH_IMAGE = \"lmp-partner-arduino-image\"" >> conf/local.conf
+echo "MFGTOOL_FLASH_IMAGE = \"lmp-factory-image\"" >> conf/local.conf
 bitbake mfgtool-files
 
 echo Exit tools folder
@@ -52,7 +52,7 @@ cp -L build-lmp-mfgtool/deploy/images/portenta-x8/mfgtool-files-portenta-x8.tar.
 cp -L build-lmp-xwayland/deploy/images/portenta-x8/imx-boot-portenta-x8 $DEPLOY_FOLDER
 cp -L build-lmp-xwayland/deploy/images/portenta-x8/u-boot-portenta-x8.itb $DEPLOY_FOLDER
 cp -L build-lmp-xwayland/deploy/images/portenta-x8/sit-portenta-x8.bin $DEPLOY_FOLDER
-cp -L build-lmp-xwayland/deploy/images/portenta-x8/lmp-partner-arduino-image-portenta-x8.wic $DEPLOY_FOLDER
+cp -L build-lmp-xwayland/deploy/images/portenta-x8/lmp-factory-image-portenta-x8.wic $DEPLOY_FOLDER
 
 cd $DEPLOY_FOLDER
 tar xvf mfgtool-files-portenta-x8.tar.gz

content/hardware/04.pro/boards/portenta-x8/tutorials/08.image-building/content.md

@@ -152,7 +152,7 @@ Choose the appropriate distribution with the command below:
 DISTRO=lmp-xwayland MACHINE=portenta-x8 . setup-environment
 ```
 
-***Support for `lmp-partner-arduino-image` is anticipated to improve continuously.***
+***Support for `lmp-factory-image` is anticipated to improve continuously. Starting from image __version 888__, _`lmp-partner-arduino-image`_ is now known as __`lmp-factory-image`__.***
 
 Following the environment setup, the process will navigate to a new directory. Here, accept the EULA with:
 
@@ -169,7 +169,7 @@ The setup completion should resemble the output shown here:
 Start the image build with Bitbake using:
 
 ```bash
-bitbake lmp-partner-arduino-image
+bitbake lmp-factory-image
 ```
 
 ***This process may take ~7 hours depending on the build host***
@@ -193,7 +193,7 @@ To flash your board, you will need to compile **lmp-mfgtool distro** to get addi
 cd ..
 DISTRO=lmp-mfgtool MACHINE=portenta-x8 . setup-environment
 echo "ACCEPT_FSL_EULA = \"1\"" >> conf/local.conf
-echo "MFGTOOL_FLASH_IMAGE = \"lmp-partner-arduino-image\"" >> conf/local.conf
+echo "MFGTOOL_FLASH_IMAGE = \"lmp-factory-image\"" >> conf/local.conf
 ```
 
 You should be able to see similar results as the following image when successful:
@@ -229,7 +229,7 @@ cp -L build-lmp-mfgtool/deploy/images/portenta-x8/mfgtool-files-portenta-x8.tar.
 cp -L build-lmp-xwayland/deploy/images/portenta-x8/imx-boot-portenta-x8 $DEPLOY_FOLDER
 cp -L build-lmp-xwayland/deploy/images/portenta-x8/u-boot-portenta-x8.itb $DEPLOY_FOLDER
 cp -L build-lmp-xwayland/deploy/images/portenta-x8/sit-portenta-x8.bin $DEPLOY_FOLDER
-cp -L build-lmp-xwayland/deploy/images/portenta-x8/lmp-partner-arduino-image-portenta-x8.wic $DEPLOY_FOLDER
+cp -L build-lmp-xwayland/deploy/images/portenta-x8/lmp-factory-image-portenta-x8.wic $DEPLOY_FOLDER
 
 cd $DEPLOY_FOLDER
 tar xvf mfgtool-files-portenta-x8.tar.gz

content/hardware/04.pro/boards/portenta-x8/tutorials/09.image-flashing/content.md

@@ -44,25 +44,27 @@ Please extract the files after you have downloaded the compressed file. The extr
 ```
 Unzipped folder
 ├── imx-boot-portenta-x8
-├── lmp-partner-arduino-image-portenta-x8.wic.gz **(Compressed)**
+├── lmp-factory-image-portenta-x8.wic.gz **(Compressed)**
 ├── mfgtool-files-portenta-x8.tar.gz **(Compressed)**
 ├── sit-portenta-x8.bin
 └── u-boot-portenta-x8.itb
 ```
 
-After verifying these files are available, you will need to decompress `mfgtool-files-portenta-x8.tar.gz` and `lmp-partner-arduino-image-portenta-x8.wic.gz`. Please ensure the `.wic` is in the unzipped folder in the main directory. The folder structure should share a similar following layout.
+After verifying these files are available, you will need to decompress `mfgtool-files-portenta-x8.tar.gz` and `lmp-factory-image-portenta-x8.wic.gz`. Please ensure the `.wic` is in the unzipped folder in the main directory. The folder structure should share a similar following layout.
 
 ```
 Unzipped folder
 ├── mfgtool-files-portenta-x8/
 ├── imx-boot-portenta-x8
-├── lmp-partner-arduino-image-portenta-x8.wic
-├── lmp-partner-arduino-image-portenta-x8.wic.gz **(Compressed)**
+├── lmp-factory-image-portenta-x8.wic
+├── lmp-factory-image-portenta-x8.wic.gz **(Compressed)**
 ├── mfgtool-files-portenta-x8.tar.gz **(Compressed)**
 ├── sit-portenta-x8.bin
 └── u-boot-portenta-x8.itb
 ```
 
+***Starting from image version 888, _`lmp-partner-arduino-image-portenta-x8.wic.gz`_ is now known as __`lmp-factory-image-portenta-x8.wic.gz`__.***
+
 ### Setting the Portenta X8 to Flashing Mode
 
 #### Flashing Mode with Carrier