Content update (linter fix)

Author: canchebagur

content/hardware/03.nano/boards/nano-33-ble-sense-rev2/tech-specs.md

@@ -1,10 +1,3 @@
-**Please read: operating voltage**
+**Important note: operating voltage**
 
-The Arduino Nano 33 BLE Sense Rev2 operates at +3.3 VDC. Never apply more than +3.3 VDC to its digital and analog pins, as higher voltages will permanently damage the board. 
-
-The 5V pin (between RST and A7) is not connected by default as a safety precaution. To enable the +5 VDC output on this pin:
-
-- Create a solder bridge on the VUSB pads
-- Power the board via USB (+5 VDC will not be available when powered through VIN)
-
-The 3V3 pin is always available and provides sufficient current for sensors and actuators. When interfacing with +5 VDC systems, use appropriate level shifters to protect the board's inputs.
+The Arduino Nano 33 BLE Sense Rev2 operates at +3.3 VDC. Never apply more than +3.3 VDC to its digital and analog pins, as higher voltages will permanently damage the board. The 5V pin (between RST and A7) is not connected by default as a safety precaution. To enable the +5 VDC output on this pin you can create a solder bridge on the VUSB pads or power the board via USB (+5 VDC will not be available when powered through VIN). The 3V3 pin is always available and provides sufficient current for sensors and actuators. When interfacing with +5 VDC systems, use appropriate level shifters to protect the board's inputs.