diff --git a/ports/espressif/boards/elio_eliobot_s3/board.c b/ports/espressif/boards/elio_eliobot_s3/board.c
new file mode 100644
index 00000000000..a83496500f1
--- /dev/null
+++ b/ports/espressif/boards/elio_eliobot_s3/board.c
@@ -0,0 +1,39 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2025 Romain Boutrois
+//
+// SPDX-License-Identifier: MIT
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+#include "lib/oofatfs/ff.h"
+#include "extmod/vfs_fat.h"
+#include "py/mpstate.h"
+#include "supervisor/filesystem.h"
+
+void board_init(void) {
+    mp_import_stat_t stat_b = mp_import_stat("boot.py");
+    if (stat_b != MP_IMPORT_STAT_FILE) {
+        fs_user_mount_t *fs_mount = filesystem_circuitpy();
+        FATFS *fatfs = &fs_mount->fatfs;
+        FIL fs;
+        UINT char_written = 0;
+        // Default boot.py: CIRCUITPY is read-only over USB so children can't
+        // break the robot's files from the drive, while code sent over the
+        // serial REPL or BLE (Eliobot's web editor) can still write them.
+        const byte buffer[] =
+            "import storage\n"
+            "\n"
+            "# Eliobot default: the USB drive is read-only, and code sent by\n"
+            "# the Elioblocs editor can write files. To edit files from the drive\n"
+            "# instead, comment out the next line.\n"
+            "storage.remount(\"/\", False)\n";
+        f_open(fatfs, &fs, "/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
+        f_write(&fs, buffer, sizeof(buffer) - 1, &char_written);
+        f_close(&fs);
+    }
+}
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
diff --git a/ports/espressif/boards/elio_eliobot_s3/mpconfigboard.h b/ports/espressif/boards/elio_eliobot_s3/mpconfigboard.h
new file mode 100644
index 00000000000..7919df48932
--- /dev/null
+++ b/ports/espressif/boards/elio_eliobot_s3/mpconfigboard.h
@@ -0,0 +1,27 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2026 Romain Boutrois
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Eliobot"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+#define CIRCUITPY_DRIVE_LABEL       "ELIOBOT"
+
+// Current boards have one status NeoPixel; the next revision chains eight.
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO1)
+#define MICROPY_HW_NEOPIXEL_COUNT (8)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)
+
+#define DEFAULT_SPI_BUS_SCK  (&pin_GPIO39)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO40)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO41)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
diff --git a/ports/espressif/boards/elio_eliobot_s3/mpconfigboard.mk b/ports/espressif/boards/elio_eliobot_s3/mpconfigboard.mk
new file mode 100644
index 00000000000..405b8e872df
--- /dev/null
+++ b/ports/espressif/boards/elio_eliobot_s3/mpconfigboard.mk
@@ -0,0 +1,27 @@
+USB_VID = 0x303a
+USB_PID = 0x8384
+USB_PRODUCT = "Eliobot"
+USB_MANUFACTURER = "ELIO"
+USB_INTERFACE_NAME = "Eliobot"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+
+CIRCUITPY_ESP_PSRAM_SIZE = 2MB
+CIRCUITPY_ESP_PSRAM_MODE = qio
+CIRCUITPY_ESP_PSRAM_FREQ = 80m
+
+CIRCUITPY_ESPCAMERA = 0
+CIRCUITPY_BITMAPFILTER = 0
+CIRCUITPY_CODEOP = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
+
+
+# Include these Python libraries in firmware.
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_HTTPServer
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_IRRemote
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BLE
diff --git a/ports/espressif/boards/elio_eliobot_s3/pins.c b/ports/espressif/boards/elio_eliobot_s3/pins.c
new file mode 100644
index 00000000000..79f6e83aa61
--- /dev/null
+++ b/ports/espressif/boards/elio_eliobot_s3/pins.c
@@ -0,0 +1,134 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2026 Romain Boutrois
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+
+    // GPIO1 : NeoPixel (WS2812B)
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) },
+
+    // GPIO2 : Eyes LED connector (J3)
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_EYES), MP_ROM_PTR(&pin_GPIO2) },
+
+    // GPIO3 : Battery voltage sense (ADC, 1:2 divider)
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_VBAT_SENSE), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO3) },
+
+    // GPIO4-7 : IR obstacle sensor outputs (TSSP77038)
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_IR_OUT_1), MP_ROM_PTR(&pin_GPIO4) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_IR_OUT_2), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_IR_OUT_3), MP_ROM_PTR(&pin_GPIO6) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_IR_OUT_4), MP_ROM_PTR(&pin_GPIO7) },
+
+    // GPIO8-9 : I2C bus
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO9) },
+
+    // GPIO10-14 : Line sensors (J1)
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_LINE_1), MP_ROM_PTR(&pin_GPIO10) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_LINE_2), MP_ROM_PTR(&pin_GPIO11) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_LINE_3), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_LINE_4), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_LINE_5), MP_ROM_PTR(&pin_GPIO14) },
+
+    // GPIO15-16 : free (no 32 kHz crystal fitted)
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+
+    // GPIO17 : Buzzer
+    { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_BUZZER), MP_ROM_PTR(&pin_GPIO17) },
+
+    // GPIO18 : Line sensor LED enable
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_LINE_LED), MP_ROM_PTR(&pin_GPIO18) },
+
+    // GPIO19 : USB_D-
+    // GPIO20 : USB_D+
+
+    // GPIO21 : VBUS sense (5V present, 1:2 divider)
+    { MP_ROM_QSTR(MP_QSTR_VBUS), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_VBUS_SENSE), MP_ROM_PTR(&pin_GPIO21) },
+
+    // GPIO26-32 : internal flash/PSRAM SPI — not available as GPIO
+
+    // GPIO33 : Line sensor command output (J1)
+    { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_LINE_CMD), MP_ROM_PTR(&pin_GPIO33) },
+
+    // GPIO34 : IR obstacle sensor 38kHz modulation output
+    { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_IR_CMD), MP_ROM_PTR(&pin_GPIO34) },
+
+    // GPIO35-38 : Motor driver (DRV8833)
+    { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_BIN2), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_AIN1), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_BIN1), MP_ROM_PTR(&pin_GPIO37) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_AIN2), MP_ROM_PTR(&pin_GPIO38) },
+
+    // GPIO39-41 : SPI header (J8) via JTAG pins MTCK/MTDO/MTDI
+    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO40) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO41) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) },
+
+    // GPIO43-44 : UART (U0TXD / U0RXD)
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+
+    // GPIO45 : SPI chip select (J8)
+    { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_GPIO45) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
diff --git a/ports/espressif/boards/elio_eliobot_s3/sdkconfig b/ports/espressif/boards/elio_eliobot_s3/sdkconfig
new file mode 100644
index 00000000000..253a3984eb1
--- /dev/null
+++ b/ports/espressif/boards/elio_eliobot_s3/sdkconfig
@@ -0,0 +1,16 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="ELIOBOT"
+
+# end of LWIP
+
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration