Merge pull request #155 from adafruit/rp2040-msc

update msc external flash example to work with rp2040

Author: hathach

examples/Composite/mouse_external_flash/.feather_rp2040_tinyusb.test.skip

@@ -23,18 +23,29 @@
 // MSC External Flash Config
 //--------------------------------------------------------------------+
 
-// Uncomment to run example with FRAM
-// #define FRAM_CS   A5
-// #define FRAM_SPI  SPI
+// Un-comment to run example with custom SPI SPI and SS e.g with FRAM breakout
+// #define CUSTOM_CS   A5
+// #define CUSTOM_SPI  SPI
 
-#if defined(FRAM_CS) && defined(FRAM_SPI)
-  Adafruit_FlashTransport_SPI flashTransport(FRAM_CS, FRAM_SPI);
+#if defined(CUSTOM_CS) && defined(CUSTOM_SPI)
+  Adafruit_FlashTransport_SPI flashTransport(CUSTOM_CS, CUSTOM_SPI);
 
 #elif defined(ARDUINO_ARCH_ESP32)
   // ESP32 use same flash device that store code.
   // Therefore there is no need to specify the SPI and SS
   Adafruit_FlashTransport_ESP32 flashTransport;
 
+#elif defined(ARDUINO_ARCH_RP2040)
+  // RP2040 use same flash device that store code.
+  // Therefore there is no need to specify the SPI and SS
+  // Use default (no-args) constructor to be compatible with CircuitPython partition scheme
+  Adafruit_FlashTransport_RP2040 flashTransport;
+
+  // For generic usage:
+  //    Adafruit_FlashTransport_RP2040 flashTransport(start_address, size)
+  // If start_address and size are both 0, value that match filesystem setting in
+  // 'Tools->Flash Size' menu selection will be used
+
 #else
   // On-board external flash (QSPI or SPI) macros should already
   // defined in your board variant if supported

examples/Composite/mouse_external_flash/mouse_external_flash.ino

@@ -27,18 +27,29 @@
 #include "Adafruit_SPIFlash.h"
 #include "Adafruit_TinyUSB.h"
 
-// Uncomment to run example with FRAM
-// #define FRAM_CS   A5
-// #define FRAM_SPI  SPI
+// Un-comment to run example with custom SPI SPI and SS e.g with FRAM breakout
+// #define CUSTOM_CS   A5
+// #define CUSTOM_SPI  SPI
 
-#if defined(FRAM_CS) && defined(FRAM_SPI)
-  Adafruit_FlashTransport_SPI flashTransport(FRAM_CS, FRAM_SPI);
+#if defined(CUSTOM_CS) && defined(CUSTOM_SPI)
+  Adafruit_FlashTransport_SPI flashTransport(CUSTOM_CS, CUSTOM_SPI);
 
 #elif defined(ARDUINO_ARCH_ESP32)
   // ESP32 use same flash device that store code.
   // Therefore there is no need to specify the SPI and SS
   Adafruit_FlashTransport_ESP32 flashTransport;
 
+#elif defined(ARDUINO_ARCH_RP2040)
+  // RP2040 use same flash device that store code.
+  // Therefore there is no need to specify the SPI and SS
+  // Use default (no-args) constructor to be compatible with CircuitPython partition scheme
+  Adafruit_FlashTransport_RP2040 flashTransport;
+
+  // For generic usage:
+  //    Adafruit_FlashTransport_RP2040 flashTransport(start_address, size)
+  // If start_address and size are both 0, value that match filesystem setting in
+  // 'Tools->Flash Size' menu selection will be used
+
 #else
   // On-board external flash (QSPI or SPI) macros should already
   // defined in your board variant if supported

examples/MassStorage/msc_external_flash/.feather_rp2040_tinyusb.test.skip

@@ -24,18 +24,28 @@
 #include "Adafruit_SPIFlash.h"
 #include "Adafruit_TinyUSB.h"
 
-// Uncomment to run example with FRAM
-// #define FRAM_CS   A5
-// #define FRAM_SPI  SPI
+// Un-comment to run example with custom SPI SPI and SS e.g with FRAM breakout
+// #define CUSTOM_CS   A5
+// #define CUSTOM_SPI  SPI
 
-#if defined(FRAM_CS) && defined(FRAM_SPI)
-  Adafruit_FlashTransport_SPI flashTransport(FRAM_CS, FRAM_SPI);
+#if defined(CUSTOM_CS) && defined(CUSTOM_SPI)
+  Adafruit_FlashTransport_SPI flashTransport(CUSTOM_CS, CUSTOM_SPI);
 
 #elif defined(ARDUINO_ARCH_ESP32)
   // ESP32 use same flash device that store code.
   // Therefore there is no need to specify the SPI and SS
   Adafruit_FlashTransport_ESP32 flashTransport;
 
+#elif defined(ARDUINO_ARCH_RP2040)
+  // RP2040 use same flash device that store code.
+  // Therefore there is no need to specify the SPI and SS
+  // Use default (no-args) constructor to be compatible with CircuitPython partition scheme
+  Adafruit_FlashTransport_RP2040 flashTransport;
+
+  // For generic usage: Adafruit_FlashTransport_RP2040(start_address, size)
+  // If start_address and size are both 0, value that match filesystem setting in
+  // 'Tools->Flash Size' menu selection will be used
+
 #else
   // On-board external flash (QSPI or SPI) macros should already
   // defined in your board variant if supported