Merge pull request #3989 from MicrosoftDocs/main

[AutoPublish] main to live - 05/02 10:31 PDT | 05/02 23:01 IST

Author: Ruchika-mittal01

docset/winserver2022-ps/grouppolicy/Set-GPRegistryValue.md

@@ -101,7 +101,7 @@ This command configures a registry-based policy setting for the registry value
 data type of `DWord`. This policy setting sets the Screen Saver timeout to 900 seconds (15 minutes)
 when Group Policy is applied on the client.
 
-### Example 1: Configure a registry-based policy settings for multiple registry values
+### Example 2: Configure a registry-based policy settings for multiple registry values
 
 ```powershell
 $params = @{

docset/winserver2025-ps/defender/Set-MpPreference.md

@@ -1519,7 +1519,7 @@ Accept wildcard characters: False
 ```
 
 ### -ScanScheduleQuickScanTime
-Specifies the time of day, as the number of minutes after midnight, to perform a scheduled quick scan.
+Specifies the time of day, as the number of minutes after midnight, to perform a daily scheduled quick scan.
 The time refers to the local time on the computer.
 If you do not specify a value for this parameter, a scheduled quick scan runs at the time specified by the **ScanScheduleOffset** parameter.
 That parameter has a default time of two hours after midnight.
@@ -1537,7 +1537,10 @@ Accept wildcard characters: False
 ```
 
 ### -ScanScheduleOffset
-Configures the number of minutes after midnight to perform a scheduled scan. The time on the endpoint is used to determine the local time. If you enable this setting, a scheduled scan will run at the time specified. If you disable or don’t enable this setting, a scheduled scan runs at the default time of two hours (120 minutes) after midnight.
+Configures the number of minutes after midnight to perform a scheduled scan. The time on the endpoint is used to determine the local time. If you enable this setting, a scheduled scan will run at the time specified. If you disable or don’t enable this setting, a scheduled scan runs at the default time of two hours (120 minutes) after midnight. 
+
+> [!TIP]
+> We recommend using the **ScanScheduleOffset** parameter instead of the **ScanScheduleTime** parameter because it's a more intuitive way to set the time for the Weekly Scheduled Scan. If both **ScanScheduleOffset** and **ScanScheduleTime** are set, whichever configuration was edited more recently is used to determine the time to execute the scan.
 
 ```yaml
 Type: UInt32

docset/winserver2025-ps/failoverclusters/Start-Cluster.md

@@ -52,7 +52,7 @@ cluster name, assuming the cluster name resource is online, can be used instead
 
 ### -IgnorePersistentState
 
-Starts the nodes in the cluster without bringing resources online on the nodes.
+Starts the nodes in the cluster without bringing resources online on the nodes. Note that this behavior will remain until the cluster is restarted or until the cluster property **IgnorePersistentStateOnStartup** is set to 0.
 
 ```yaml
 Type: SwitchParameter

docset/winserver2025-ps/smbshare/Set-SmbServerConfiguration.md

@@ -1017,12 +1017,12 @@ Accept wildcard characters: False
 
 This parameter specifies the minimum version of the SMB protocol to be used. Acceptable values are:
 
-- None – There is no maximum protocol version specified, the server can use any supported version.
-- SMB202 – SMB 2.0.2 is the maximum version accepted by the SMB Server
-- SMB210 - SMB 2.1.0 is the maximum version accepted by the SMB Server
-- SMB300 - SMB 3.0.0 is the maximum version accepted by the SMB Server
-- SMB302 - SMB 3.0.2 is the maximum version accepted by the SMB Server
-- SMB311 - SMB 3.1.1 is the maximum version accepted by the SMB Server
+- None – There is no minimum protocol version specified, the server can use any supported version.
+- SMB202 – SMB 2.0.2 is the minimum version accepted by the SMB Server
+- SMB210 - SMB 2.1.0 is the minimum version accepted by the SMB Server
+- SMB300 - SMB 3.0.0 is the minimum version accepted by the SMB Server
+- SMB302 - SMB 3.0.2 is the minimum version accepted by the SMB Server
+- SMB311 - SMB 3.1.1 is the minimum version accepted by the SMB Server
 
 ```yaml
 Type: Smb2DialectMin